Microchip MCP23008T-E/SO, 8-Channel I/O Expander 10MHz, I2C, 18-Pin SOIC

  • RS-stocknr. 177-3187
  • Fabrikantnummer MCP23008T-E/SO
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

The MCP23X08 device provides 8-bit, general purpose, parallel I/O expansion for I2C bus or SPI applications. The two devices differ in the number of hardware address pins and the serial interface: MCP23008 – I2C interface, three address pinsMCP23S08 – SPI interface, two address pins
The MCP23X08 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.

Additional Features:
8-bit port expander with interrupt output
3 address inputs for up to 8 devices on one bus
25mA sink/source capability per I/O
Supports 100kHz,400kHz and 1.7MHz I2C™Compatible modes
Internal power-on-reset (POR)

Specificaties
Kenmerk Waarde
Number of I/O Channels 8
Interface I2C
Number of Pins 18
Package Type SOIC
Clock Frequency 10MHz
Mounting Type Surface Mount
Maximum Supply Voltage 5.5 V
Minimum Supply Voltage 1.8 V
610 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,859
(excl. BTW)
1,039
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
0,859 €
8,59 €
30 +
0,836 €
8,36 €
*prijsindicatie
Verpakkingsopties
Related Products
The MCP25625 is a complete, cost-effective and small-footprint ...
Description:
The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters ...
The Microchip Technology Inc. 24FC64F is a 64Kb ...
Description:
The Microchip Technology Inc. 24FC64F is a 64Kb I2C™ compatible Serial EEPROM. The device is organized as a single block of 8K x 8-bit memory with a 2-wire serial interface. Low-voltage design permits operation down to 1.7V, with standby and ...
The Microchip MTCH652 is a Driver IC designed ...
Description:
The Microchip MTCH652 is a Driver IC designed to drive High-Voltage Outputs in Capacitive Touch applications. The MTCH652 combines a Boost Converter with 19 Level Shifters to drive up to 19 channels.The device is programmable via a Configuration (CONFIG) registers. ...
400kbps I²C-Compatible Serial Interface2V to 5.5V Operation5V Overvoltage ...
Description:
400kbps I²C-Compatible Serial Interface2V to 5.5V Operation5V Overvoltage Tolerant I/OsSupports Hot Insertion16 I/O Pins that Default to Inputs on Power-UpOpen-Drain Interrupt Output (Active-Low INT)Bus Timeout for Lock-Up-Free OperationNoise Filter on SCL/SDA Inputs64 User-Selectable Slave ID AddressesLow Standby ...