Parker Hydraulic End Sleeve TXS12

  • RS-stocknr. 302-8196
  • Fabrikantnummer TXS12
  • Fabrikant Parker
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

End Sleeve

Suitable for use with complete range of Triple-Lok flared tube fittings and hydraulic tube

//media.rs-online.com/t_line/L302777-01.jpg

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Specificaties
Kenmerk Waarde
For Tube Outside Diameter 12mm
Overall Length 14mm
Material Steel
Finish Zinc Plated
Maximum Operating Pressure 350 bar
Maximum Operating Temperature +120°C
Minimum Operating Temperature -40°C
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,594
(excl. BTW)
0,719
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
0,594 €
5,94 €
50 - 90
0,57 €
5,70 €
100 - 240
0,558 €
5,58 €
250 +
0,546 €
5,46 €
*prijsindicatie