Danfoss Thermostats with LCD Display, +5 → +30 °C

  • RS-stocknr. 833-0898
  • Fabrikantnummer RET2000B-RF+RX1-S - 087N6444
  • Fabrikant Danfoss
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Danfoss Battery Powered Digital Room Thermostat RET2000B-RF with RX1-S

The Danfoss RET2000M battery operated digital room thermostat combines sleek and modern design with high performing energy saving control. This digital room thermostat comes with the RX1-S single channel receiver, allowing it to be easy installed wherever is more convenient. The room thermostat has back lit and easy to read display that clearly shows the room temperature and the output status. The RET2000M also features the Danfoss chrono-poportional control, which significantly improves boiler efficiency by optimising water temperature. The room thermostat includes stylish backlit LED icons giving clear indication of power and output status.

Battery powered
Selectable Chrono Proportional or ON/OFF control
Upper and lower temperature limits
Output on indication
Remote sensor input
Push button lock
Cooling option with compressor delay
Fahrenheit or Centigrade selectable display

Specificaties
Kenmerk Waarde
Additional Features LCD Display
Contact Rating 3A
Contact Voltage 10 → 230 V ac
Switch Configuration SPDT
Supply Voltage 230 V ac
Number of On/Off Cycles Per Day 1
Maximum Temperature +30 °C
Minimum Temperature +5 °C
Temperature Range +5 → +30 °C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
167,10
(excl. BTW)
202,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
167,10 €
Related Products
Standard: has a front mounted, graduated temperature adjustment ...
Description:
Standard: has a front mounted, graduated temperature adjustment dial.,Tamperproof: has a plain front cover concealing the temperature adjustment control and a temperature set-back of approximately 6°C (ideal where frost protection is required). Surface mounting with a thermoplastic front cover suitable ...
Thermostats that can switch between heating and cooling ...
Description:
Thermostats that can switch between heating and cooling units. Surface mounting suitable for industrial and commercial applicationsSnap action switch with change over contactsShunt accelerator minimises overshootDial can be set for max/min settingsSwitching differential 0.5°C.
With an electronic sensing element for accurate temperature ...
Description:
With an electronic sensing element for accurate temperature controlRetains the traditional analogue dial and overall sizeSuitable for surface or conduit box mountingThermostat clips onto a backplate for easy, neat installationLarge dial for accurate settingRange limiting stops which can also provide ...
Wall mounting thermostat to control Split Air Conditioners, ...
Description:
Wall mounting thermostat to control Split Air Conditioners, with reversing valve (heat pumps), via an automatic changeover contact and without a manual summer/winter switchAlso suitable for controlling Split Units (without reversing valve) and 4-Pipe Fan Coil systemsFitted second (boost) heating ...