A3212ELHLT-T Allegro Microsystems,, Omnipolar Hall Effect Sensor Switch, 3-Pin SOT-23

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems

The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.

Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.

Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

Hall Effect Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point 10 Gs
Maximum Magnetic Sensor Operating Point 55 Gs
Minimum Operating Supply Voltage 2.5 V
Maximum Operating Supply Voltage 3.5 V
Length 2.98mm
Width 1.91mm
Height 0.95mm
Dimensions 2.98 x 1.91 x 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 5.9 Gs
770 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
0,99
(excl. BTW)
1,20
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
0,99 €
4,95 €
25 - 95
0,692 €
3,46 €
100 - 245
0,544 €
2,72 €
250 - 495
0,502 €
2,51 €
500 +
0,458 €
2,29 €
*prijsindicatie
Verpakkingsopties
Related Products
The ambient light sensor, VEML7700 has high accuracy ...
Description:
The ambient light sensor, VEML7700 has high accuracy based on the sensitive photodiode and 16-bit resolution analogue to digital converter. The surface mount package has a side view form. I²C serial communication interfaceOperation voltage from 2.5 V to 3.6 V. ...
Current sensing package with flip-chip technology3000 Vrms galvanic ...
Description:
Current sensing package with flip-chip technology3000 Vrms galvanic isolationHigh accuracy over temperatureTypical output error of 1%.
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity ...