Hall-effect isolated current sensor+-30A

  • RS-stocknr. 202-8735
  • Fabrikantnummer ACHS-7193-000E
  • Fabrikant Broadcom
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PH
Productomschrijving

The Broadcom is a fully integrated Hall-effect based isolated linear current sensors which are designed for AC or DC current sensing in industrial, commercial, and communications systems.

Ratiometric output from supply voltage
Extremely stable output offset voltage
Near-zero magnetic hysteresis

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Pin Count 8
2000 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 100)
1,968
(excl. BTW)
2,381
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
100 - 100
1,968 €
196,80 €
200 - 400
1,914 €
191,40 €
500 - 900
1,755 €
175,50 €
1000 - 1900
1,494 €
149,40 €
2000 +
1,404 €
140,40 €
*prijsindicatie
Related Products
Small size Hall Effect sensor for fitting to ...
Description:
Small size Hall Effect sensor for fitting to printed circuits to measure currents up to 100 A RMS.Current measurements of up to 16 A; 25 A; 33 A; 50 A or 100 A RMS based on primary connections made on ...
A linear output Hall Effect magnetic field sensor ...
Description:
A linear output Hall Effect magnetic field sensor from Taiwan Semiconductor. The device produces a ratiometric output voltage proportional to the applied magnetic flux density over a range of ±800 Gauss. Supply voltage: 3.0 to 6.5VSupply current: 2.2mA (typ)Bandwidth: 20kHzMagnetic ...
These magnetoresistive sensors are around ten times more ...
Description:
These magnetoresistive sensors are around ten times more sensitive (in range) than classic Hall effect sensors, in the direction parallel to the magnetoresistive element.Their omnipolar characteristics allow activation of the sensor by a north or south pole.
A range of Hall Effect switching ICs from ...
Description:
A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.