Hall-effect isolated current sensor+-20A

  • RS-stocknr. 202-8734
  • Fabrikantnummer ACHS-7192-000E
  • Fabrikant Broadcom
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PH
Productomschrijving

The Broadcom is a fully integrated Hall-effect based isolated linear current sensors which are designed for AC or DC current sensing in industrial, commercial, and communications systems.

Ratiometric output from supply voltage
Extremely stable output offset voltage
Near-zero magnetic hysteresis

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Pin Count 8
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 5)
2,34
(excl. BTW)
2,83
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
2,34 €
11,70 €
25 - 45
2,24 €
11,20 €
50 - 70
2,106 €
10,53 €
75 +
2,024 €
10,12 €
*prijsindicatie
Related Products
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
Integrated speed sensor ICPole size independent operation2-pin current ...
Description:
Integrated speed sensor ICPole size independent operation2-pin current interface-40°C to 150°C operating temperature rangeZero speed operationNo calibration requiredInsensitive to mechanical vibrationProtection against reverse polarityIntegral capacitorVibration rejectionApplicationsTransmission speed and ...
Vertical Hall plates to measure magnetic field parallel ...
Description:
Vertical Hall plates to measure magnetic field parallel to PCB and package surface3.5V to 32V operating supply voltageOperation from unregulated power supplyReverse polarity protection (-18V)Overvoltage capability up to 42V without external resistorLow current consumptionOutput short-circuit & overtemperature ...
The MLX91205 is a single axis IMC-Hall® integrated ...
Description:
The MLX91205 is a single axis IMC-Hall® integrated current sensor featuring Triaxis® technology. It produces an analog, ratiometric output voltages proportional to the applied magnetic field parallel with the chip surface.The circuit is fabricated using a standard CMOS process, with ...