Adafruit 2298, PiTFT Plus 2.8in Resistive Touch Screen Add On Board for Raspberry Pi

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

PiTFT Plus LCD TFT Touchsceens for Raspberry Pi, Adafruit

The PiTFT Plus are a range of TFT LCD resistive touchscreens designed specifically to fit neatly onto the top of a Raspberry Pi.

They are available with 3 screen sizes: 2.8, 3.2 and 3.5 inch.

These TFT LCD touchscreens work with the 2 x 20 connector so will not work with the very first original Pi but do work with all later generation Pi's. They use the high-speed SPI interface on the Pi and can be used as a console, X window port, displaying images or videos. You can also have an HDMI display separately connected.

How can you install it?

Four mounting ears can be used to attach the display & Pi to a bezel. They can also be snapped off with pliers if you want it to exactly match the Pi size.

A little bit about the display

Display current draw is mostly the backlight and at full power, the backlight draws around 100 mA. It uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. You can connect a 26-pin Pi GPIO cable to it. The other GPIO are broken out into solder pads at the bottom.

Features:

• Low power consumption, suitable for battery operated systems
• Image sticking eliminated function
• CMOS compatible inputs
• One chip solution for COG assembly
• 24-bits Input Image function
• Partial display mode
• Deep standby mode
• Normal black/normal white LCD
• Built-in internal OTP power

PiTFT Plus 2.8” TFT LCD Touchscreen 320 x 240 pixels (RS 124-5479)
PiTFT Plus 3.2” TFT LCD Touchscreen 320 x 240 pixels (RS 124-5491)
PiTFT Plus 3.5” TFT LCD Touchscreen 480 x 320 pixels (RS 124-5487)

Specificaties
Kenmerk Waarde
Diagonal Display Size 2.8in
Display Technology Resistive Touch Screen
Kit Classification Add On Board
Kit Name PiTFT Plus
For Use With Raspberry Pi
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,21
(excl. BTW)
37,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
31,21 €
Related Products
FeatherWings add specific functionality to your Feather development ...
Description:
FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.The FeatherWing OLED adds a 128 x 32 pixel monochrome OLED plus 3 buttons to your Feather project.OLED screens are ...
Grove - OLED Display 0.96"is an OLED monochrome ...
Description:
Grove - OLED Display 0.96"is an OLED monochrome 128´64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low ...
Ideal for AV installations for VGA and 3.5mm ...
Description:
Ideal for AV installations for VGA and 3.5mm PC audio.
The Watch DevPack enables you to add a ...
Description:
The Watch DevPack enables you to add a 1.3 inch graphics display to the SimpleLink™ SensorTag Evaluation Kit by plugging it into the kit expansion header. With SensorTag technology you can easily develop Cloud applications using the SensorTag app that ...