Adafruit 1694, 10.1in Colour LCD Display Module for Arduino, BeagleBone, LattePanda, Raspberry Pi

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

10.1" IPS Display 1280 x 800 pixel with Driver Board and Audio Driver - HDMI/VGA/NTSC/PAL

This 10.1 inch IPS screen is supplied complete with driver board which gives you the option to use it with HDMI, VGA or Composite. This range of inputs enables it to be used with a wide range of displays, TVs and platforms including Raspberry Pi, Arduino LattePanda and many more.

The screen is a widescreen TFT LCD display has a wide viewing angle and it is also very thin. There are some mounting tabs around the edges so you can easily incorporate it into your design.

The board also has a stereo audio driver producing 3 W output at 4 Ω. Included with the display and boards is a plug-in cable that connects to the 4 speaker output pins. There is also a small wired PCB with little buttons which enables you to adjust brightness, colour, contrast and video input.

Technical Specifications
Power supply: 9 V dc to 12 V dc via a 2.1 mm DC jack
16:10 display ratio
Resolution: 1200 x 800 pixels
Visible area: 217 x 135 mm
Aspect Ratio: 16:10
Brightness: 350 cd/m²
Contrast: 800:1
Display dimensions: 230 x 150 x 5.2 mm

Weight
Screen: 165 g
Components: 82 g

Total Power Draw (Backlight On)

5 V: 980 mA (not guaranteed to function at 5 V)
6 V: 780 mA (not guaranteed to function at 6 V)
7 V: 660 mA
8 V: 575 mA
9 V: 515 mA
10 V: 450 mA
11 V: 415 mA
12 V: 380 mA

Note

A power supply is not included.

This display is not HDCP compatible - it cannot be used with 'secured' HDMI sources

Adafruit HDMI Displays

Specificaties
Kenmerk Waarde
Diagonal Display Size 10.1in
Display Technology Colour LCD Display
Kit Classification Module
For Use With Arduino, BeagleBone, LattePanda, Raspberry Pi
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
138,35
(excl. BTW)
167,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
138,35 €
Related Products
The 4D Systems MOTG (Modules on the Go) ...
Description:
The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules.Utilising a modular concept, the MOTG range provides a simple method for swift ...
The ME812A-WH50R module consists of a display controller ...
Description:
The ME812A-WH50R module consists of a display controller board based on the FT812 EVE device, built into a 5.0in WVGA LCD touchscreen display unit. 800 x 480pixel colour TFT LCD display with resistive touchscreen and pressure sensingSupports portrait and landscape ...
The ME813A-WH50C module consists of a display controller ...
Description:
The ME813A-WH50C module consists of a display controller board based on the FT813 EVE device, built into a 5.0in WVGA LCD touchscreen display unit. 800 x 480pixel colour TFT LCD display with capacitive touch, up to 5 simultaneous pointsSupports portrait ...
The VM800B development modules provide a hi-quality display ...
Description:
The VM800B development modules provide a hi-quality display system in a bezel with a fitted LCD display and FT800 component board in a rugged, plastic enclosure. Offered in black or pearl colour, this display sub-system can shorten development time at ...