Pegler Yorkshire Bronze Globe Valve 110011, 1-1/2 in BSPT 32 bar

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Bronze Globe Valves PN32 Series B

A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar
Rising Stem
Threaded bonnet
Renewable disc which is suitable for steam service
Bronze trim with glass filled PTFE disk
BS21 Taper thread (ISO 7)

//media.rs-online.com/t_line/L466779-01.gif
Specificaties
Kenmerk Waarde
Connection 1-1/2 in BSPT
Maximum Working Pressure 32 bar
Body Material Bronze
Thread Size 37257in
Thread Standard BSPT
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
94,65
(excl. BTW)
114,53
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
94,65 €
5 +
91,75 €
Related Products
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature ...
Description:
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature : -20゚C / +100゚C Operating pressure : see non-shock cold working pressure chart on data sheetThreads : ISO 228 parallel female by female threads Stem : NylonNBR 65 SH/PS seal on nylon ...
For heating, sanitary and compressed air systems, pumps ...
Description:
For heating, sanitary and compressed air systems, pumps and autoclavesBody in hot forged DZR brassThreading to BS2779Hostaform inner valveSpring in 18//8 AISI 302-304 stainless steelHydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow in one direction only, ...
High quality lubricated packingNon rising stemCan be re-packed ...
Description:
High quality lubricated packingNon rising stemCan be re-packed under pressureSolid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
RS Screwed End Globe Valves used for regulating ...
Description:
RS Screwed End Globe Valves used for regulating flow in a pipeline and available in a variety of sizes. 1/4"-2" (DN8-DN50)W.P: 200WOGW.T: -20°C-200°C (-4°F-392°F)Investment castingThread type: ASME B1.20.1 (NPT), DIN 2999 & BS21, ISO7/1 & EN10226.