Microchip MCP9600-I/MX, 18-bit Serial Thermocouple to Digital Converter Dual Differential Input, 20-Pin MQFN
- RS-stocknr. 905-3040
- Fabrikantnummer MCP9600-I/MX
- Fabrikant Microchip
MCP9600 Thermocouple Voltage Converter
The MCP9600 from Microchip is a Thermocouple to Digital Converter that translates the Thermocouple EMF into degrees Celsius with an accuracy of ±1.5°C. Integrated into the device is Cold-Junction Compensation.
The device includes user-programmable registers that allow the configuration of Low-Power modes, Temperature Alert outputs and Digital Filter for transient temperatures.
Features
Supports Type K, J, T, N, S, E, B and R Thermocouples
±1.5°C (Max.) Hot-Junction Accuracy
Measurement Resolution: Hot- and Cold-Junctions: 0.0625°C (typical)
Four Programmable Temperature Alert Outputs
Programmable Digital Filter for Temperature
Low Power Modes
2-wire Interface: I2C™ Compatible, 100 kHz, supports up to 8 devices per I2C bus
Operating Voltage Range: 2.7V to 5.5V
Operating Current: 300 μA (typical)
Shutdown Current: 2 μA (typical)
Analogue to Digital Converters - Microchip
| Kenmerk | Waarde |
|---|---|
| Resolution | 18-bit |
| Number of ADCs | 2 |
| Digital Interface Type | Serial (I2C) |
| Mounting Type | Surface Mount |
| Number of Input Channels | 1 |
| Sampling Rate | 3sps |
| Architecture | Delta Sigma |
| Typical Single Supply Voltage | 2.7 → 5.5 V |
| Package Type | MQFN |
| Pin Count | 20 |
| Input Signal Type | Differential |
| Input Type | Voltage |
| Power Supply Type | Single |
| Integral Nonlinearity Error | 10ppm |
| Width | 5mm |
| Height | 1mm |
| Maximum Operating Temperature | +125 °C |
| Length | 5mm |
| Dimensions | 5 x 5 x 1mm |
| Minimum Operating Temperature | -40 °C |
