Phoenix Contact Fused DIN Rail Terminal, UK Series, 500 V, 6.3A, 5 x 20 mm, 5 x 25 mm, 5 x 30 mm Fuse, Black Single

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: PL
Productomschrijving

Phoenix Contact, Fused DIN Rail Terminals

The Phoenix Contact UK-5-HESI series of fuse modular terminal blocks offer excellent protection to electrical systems, protecting them against overcurrent and short-circuiting. Easily clipped onto DIN rail, the range is easily interchanged and therefore offers you greater flexibility with the part.

Features and Benefits

• Large-surface labeling

• Safety lever locked in end position

• Hinged disconnect lever

• Flip-open compartment to accommodate a fuse

• Options to accommodate 5x20mm and 6.3x32mm fuses

• Terminal width 8.2 (5x20mm), and 10.2 (6.3x32mm)

Typical Applications

• Protecting critical sensor or relay equipment

Note

Parameters in tech. spec. table are with respect to UL and CSA Approvals. With UL approval these products have a nominal rating of 10A @ 600V; with CSA approval they have a nominal rating of 25A @ 600V

Approvals

UL recognised component, CSA certified

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 26 → 10 AWG
Number of Connectors 2
Colour Black
Pitch 8.2mm
Fuse Size 5 x 20 mm, 5 x 25 mm, 5 x 30 mm
Current Rating 6.3A
Voltage Rating 500 V
Termination Method Screw Down
Rail Type Compatibility NS35
Series UK
81 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
41 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
10,68
(excl. BTW)
12,92
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
10,68 €
10 - 24
10,15 €
25 +
9,62 €
Related Products
Bases for fixing commining blocks to DIN rail. ...
Description:
Bases for fixing commining blocks to DIN rail. Material: polypropylene, natural colourMaximum continuous operating temperature: 85°CSelf extinguishing: UL 94 - V2; IEC 695-2-1 to 850°C.
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
An additional selection of 2.5 and 4mm² terminals ...
Description:
An additional selection of 2.5 and 4mm² terminals in useful colours including the newphase colours black, brown and grey, as well as white, orange, yellow and red. Identify signals or voltages easilyTerminal colours match incoming cables, reducing wiring errorThree phase ...
Spring-loaded fuse terminals adopt the functional operation of ...
Description:
Spring-loaded fuse terminals adopt the functional operation of the fuse holder and potential distributionOptional fuse formats as version 5 x 20 mm (...HESI or ...HEDI) or blade fuse (...FSI/C)Optional indicator for signalling a tripped fusePolyamide insulating material corresponds to UL ...