Entrelec Fused DIN Rail Terminal, MB Series, 10 (stranded) mm², 16 (solid) mm², 600 V, 10A, 5 x 20mm Fuse, Grey

  • RS-stocknr. 424-822
  • Fabrikantnummer 1SNA111033R0300
  • Fabrikant Entrelec
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Fused Terminals

Two versions of fused terminals
The latched, pull up fuse terminals are available for 1 1/4 in. x 1/4 in., BS1362 and 5x20mm/5x25mm fuses
The screw cap fused terminals are suited to 5x20mm fuses and is available with or without a neon (110-220V) indicator

Note

The fuseholder limits the rating to 250V/16A irrespective of markings on the terminals

Approvals

UL listed, CSA certified.

Approvals

1, 2

5000 Universal Series

This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. Cable entry and clamp design allows easy installation, higher voltage and cable carrying capacity. Cable markers are available RS 460-569

Note

Stock numbers 472-9569 and 472-9575 are compatible with deep top hat rails only

Specificaties
Kenmerk Waarde
Wire Size 16 AWG
Cable CSA 10 (stranded) mm², 16 (solid) mm²
Colour Grey
Pitch 12mm
Fuse Size 5 x 20mm
Current Rating 10A
Voltage Rating 600 V
Termination Method Screw Clamp
Rail Type Compatibility G, Top Hat
Series MB
Maximum Operating Temperature +110°C
Minimum Operating Temperature -55°C
400 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
5,386
(excl. BTW)
6,517
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
5,386 €
26,93 €
*prijsindicatie
Related Products
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Description:
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the ...
This flexible terminal block enables a fuse connection ...
Description:
This flexible terminal block enables a fuse connection via the top level, a straight feedthrough middle level and, on the KDKS1/PE, an earth connection to the DIN rail by the bottom level. Fuse of 20x5mm or 25x5mm may be fitted. ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...
The Phoenix Contact UK-5-HESI series of fuse modular ...
Description:
The Phoenix Contact UK-5-HESI series of fuse modular terminal blocks offer excellent protection to electrical systems, protecting them against overcurrent and short-circuiting. Easily clipped onto DIN rail, the range is easily interchanged and therefore offers you greater flexibility with the ...