Gems Sensors RotorFlow Electronic Flow Sensor, 2 L/min → 20 L/min, RFO Series

  • RS-stocknr. 395-6877
  • Fabrikantnummer 156261BSPP
  • Fabrikant Gems Sensors
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

RFO Type Electronic Flow Sensor

Gems™ Sensors popularised the RotorFlow® paddle wheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation and an unprecedented price/performance ratio.

Features and Benefits

• Accurate flow rate indication with integral visual confirmation • 4.5 V dc to 24 V dc pulsed output

Product Application Information

• Water purification/Dispensing systems • Chemical metering equipment
• Lasers and welders
• Water injection systems
• Semiconductor processing equipment
• Chillers and heat exchangers

Altech Flow Sensors & Switches

Specificaties
Kenmerk Waarde
Media Monitored Liquid
Device Type RotorFlow Electronic
Minimum Flow Rate 2 L/min
Maximum Flow Rate 20 L/min
Supply Voltage 4.5 → 24 V dc
Pipe Diameter Range 1/4 in
Connection Type 1/4 BSP Female
Maximum Pressure 13.8bar
Material Brass
Minimum Media Temperature -29 °C
Maximum Media Temperature +100°C
Minimum Operating Temperature -29°C
Maximum Operating Temperature +100°C
Series RFO
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
54 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
173,00
(excl. BTW)
209,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
173,00 €
Related Products
The proven diaphragm-covered standard sensor for free chlorine ...
Description:
The proven diaphragm-covered standard sensor for free chlorine CLE3 is used to monitor or control all types of clear water. The variant CLE3.1 is especially suitable for an excess of combined chlorine, the calculation of combined chlorine from the measurement ...
Fluid passes through internal flow straighteners, to stabilize ...
Description:
Fluid passes through internal flow straighteners, to stabilize turbulence, before impacting on the vaned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips which are detected by a sensor mounted ...
The Atrato Process ultrasonic flowmeter has been designed ...
Description:
The Atrato Process ultrasonic flowmeter has been designed to operate in challenging process and control environments. The body is manufactured from durable 316 stainless steel and the electrical components are sealed to IP65 rating. Four flow ranges are available from ...
This Flow sensor integrates a Georg Fischer Signet ...
Description:
This Flow sensor integrates a Georg Fischer Signet 9900 single channel transmitter with a paddle wheel flow sensor and tough PP field mount casing. The 9900 transmitter features a back lit display with large characters giving up to 4 times ...