RS PRO, 0.05 → 10 L/min Flow Transducer, Cable, Pulse, 4.5 → 24 V dc

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Mini Turbine Flow Meter

The mini turbine flowmeter is designed to give high performance and competitive pricing. Its totally non-metallic wetted components make this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept 8mm hose sizes. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the 'O' ring seal is typically Viton®.

At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with a most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout.

Features and Benefits:

• Low-cost Sapphire bearings
• Body and cap made from durable PVDF
• Over-moulded Magnets
• Viton 'O' ring seal
• Hall effect sensor
• 0.1% repeatability
• -25°C min to 125°C max
• Supplied with two metres of oil resistant, screened cable

Typical applications:

• Drink dispensing Laboratory tests
• Cooling equipment
• Active flow alarms
• Semiconductor plant

Flow Rates:

The liquid flow rate can be controlled by applying different-size jets (attached):

Note

When used in automotive applications, the formation of vapour should be minimised by fitting the transducer between the fuel pump and the carburettor, but before any pressure regulator. The device should be mounted vertically if vapour is likely to form.

//media.rs-online.com/t_line/L256225-01.gif
//media.rs-online.com/t_line/LD256225-01.gif
Specificaties
Kenmerk Waarde
Maximum Flow Rate 0.05 → 10 L/min
Electrical Connection Cable
Control Output Pulse
Supply Voltage 4.5 → 24 V dc
Pipe Diameter Range 8 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +125°C
For Use With Oil & Water
Current Rating 8 mA
39 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
92 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
106,37
(excl. BTW)
128,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
106,37 €
Related Products
From TE Connectivity, a range of waterproof industrial ...
Description:
From TE Connectivity, a range of waterproof industrial fibre optic cable assemblies from the FullAXS mini connector sealing system. The cable assemblies feature the unique FullAXS mini connectors which are 23% smaller than the current FullAXS connectors. Providing an excellent ...
The magnetic-inductive volumetric flow sensors of the SM ...
Description:
The magnetic-inductive volumetric flow sensors of the SM series monitor liquids. They detect the three process categories volumetric flow quantity, consumed quantity and medium temperature. Peak consumption, present consumption or accumulated consumption can be accessed and adjusted via programmed switch ...
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
Suitable for flow measurement & ON/OFF control applications ...
Description:
Suitable for flow measurement & ON/OFF control applications with process fluids, pump protection, cooling/heating circuits and lubricationInterfaces via S030 pipework flow adaptor (see stock no. 249-7513 typically)Large LCD display of flow rate with bargraphSimulation function, LED status indicationMulti-language ...