Parker, 2 → 150 L/min Flow Transducer, Cable Plug, Pulse, 24 V dc

  • RS-stocknr. 285-790
  • Fabrikantnummer DFT.980.RS
  • Fabrikant Parker
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Combined Liquid Flow Transducer/Transmitter

Fluid passes through internal flow straighteners, to stabilize turbulence, before impacting on the vaned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips which are detected by a sensor mounted externally to the glass tube.

Model 1

Polyester body and borosilicate glass tube; acetal bearings and nitrile seal material
Accuracy ±2% of indicated flow
Operating temperature range 5 to 60°C (water) 80°C (oil)
Port connection: 1in. BSP parallel thread
Work in any plane and accept reverse flow
Dimensions (mm): H100 x W42 x L196
Converts the detected pulses to a 4-20mA output signal, proportional to the flow rate
Supplied calibrated to 4-100 l/min. (may be user recalibrated up to a maximum of 150 l/min.
Easy to install

Model 2

Gives a pulse output proportional to flow rate
Ideal for use in totalising/latching applications when used with a compatible counter
Supplied calibrated to 2-150 l/min. (NOT user adjustable)

//media.rs-online.com/t_line/LD257026-01.gif
//media.rs-online.com/t_line/LI257026-01.gif

Supplied with

calibration to 2-150 l/min (NOT user adjustable).

Specificaties
Kenmerk Waarde
Maximum Flow Rate 2 → 150 L/min
Electrical Connection Cable Plug
Control Output Pulse
Supply Voltage 24 V dc
Display Screen No
Pipe Diameter Range 1 in
Minimum Operating Temperature 5°C
Maximum Operating Temperature +60°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10/12/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
357,89
(excl. BTW)
433,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
357,89 €
Related Products
These blanking plugs are manufactured from high quality ...
Description:
These blanking plugs are manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel. They are designed to blank off threaded entry holes in hazardous areas with a potentially explosive atmosphere. Equipment protection levels: Ex d I/IIC ...
304 grade stainless steel construction, ideally suited for ...
Description:
304 grade stainless steel construction, ideally suited for use in aggressive environmentsConsists of reed switch and pivoted actuator magnetHigh temperature operation of up to 120°C0.1 / 1 m XLPE cable0.75 mn SG of liquidUser configurable N/O or N/C operation by ...
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
Suitable for flow measurement & ON/OFF control applications ...
Description:
Suitable for flow measurement & ON/OFF control applications with process fluids, pump protection, cooling/heating circuits and lubricationInterfaces via S030 pipework flow adaptor (see stock no. 249-7513 typically)Large LCD display of flow rate with bargraphSimulation function, LED status indicationMulti-language ...