S/steel stem SPSTmetal switch w/Si cable

  • RS-stocknr. 395-7072
  • Fabrikantnummer 010-3457
  • Fabrikant Gems Sensors
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Metal Level Switches – Series 1950

Extremely accurate level switches ideal for higher temperatures and corrosive liquids.

IP64 Rated
Stainless Steel Stem and Float

//media.rs-online.com/t_line/L395704-04.gif
//media.rs-online.com/t_line/LI395704-04.gif

Gems Sensors Float Switch

The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. It has mounting thread G1/4inWarning:The cable entry point must not be submerged under any circumstancesThey must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outsideOn the vertical type, the mounting thread and cable entry must be above the highest level of the liquid

Features and Benefits

Operating pressure is 30bar Depth of immersion is 30mm Min SG of liquids is 0.75 Reed switch is SPST 100V

Certifications

IP64 rated

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal, Vertical
Switch Output Relay
Body Material Stainless Steel
Cable Length 1m
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Maximum Pressure 30bar
26 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
42 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
98,00
(excl. BTW)
118,58
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
98,00 €
5 - 9
95,01 €
10 +
91,92 €
Related Products
This RS PRO float switch is ideal for ...
Description:
This RS PRO float switch is ideal for water dispensers, tank monitoring systems, vending machines, coffee machines and printing machines. They are made from a Polypropelene housing which makes them suitable for a wide range of applications. They are even ...
A reusable, compact leak detection switch that is ...
Description:
A reusable, compact leak detection switch that is ideal for use with double wall tanks, containment sumps and double wall pipes. The LS-10 uses dry switching for increased reliability and is easy to clean and reinstall after being triggered. The ...
The Cynergy3 MS series of float switches are ...
Description:
The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches are capable of reaching 100m in depth. MS float switches come with a 5m ...
FFSMC submerged-type float switches may be used in ...
Description:
FFSMC submerged-type float switches may be used in environments where wide and/or rapid fluctuations in ambient fluid temperature occur. The blue polyurethane-bodied model (361-1833) is suitable for use within sewers and industrial waste systems. The design incorporates a self-weighted cable ...