Vert, SPNO 25VA, PPS, 1/8NPT mount, 50 c

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Float Switch

The RS PRO vertical mounting float switch has an output of NO/NC with a maximum switching voltage of 240VAC and switching current of 0.6A. It is made up of Polyphenylene Sulphide. The mounting is either from the top or bottom of a tank from the inside, so requires access to the inside of the tank. The switch action may be reversed by removing the float, inverting it, then refitting to the stem.

Features and Benefits

• NPT connector: 1/8in
• Compact design
• Cable length: 1m
• Operating temperature ranges between -10°C and 120°C

Applications

• Vending machines
• Printing systems and chemical dosing equipment

Certifications

• ANSI/ESD S20.20: 2014
• BS EN 61340-5-1: 2007

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Polyphenylene Sulphide
Cable Length 1m
Minimum Operating Temperature -10°C
Maximum Operating Temperature +120°C
Maximum AC Voltage 240V
Maximum DC Voltage 120V
Maximum Current 600 mA
Current Rating 600 mA
32 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
16,29
(excl. BTW)
19,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
16,29 €
Related Products
These Metacone mounts have been designed for high ...
Description:
These Metacone mounts have been designed for high load capacity with relatively large static deflections. The high loading for a given size is achieved by utilising the rubber to best advantage in shear and compression. Typically the mountings are assembled ...
The STG-125 is a highly innovative diesel engine ...
Description:
The STG-125 is a highly innovative diesel engine controller that comes with outstanding monitoring functions that are suitable for all KUBOTA® diesel engines. The controller has a high integration grade that replaces vintage ignition switches and panel-mounted indicators in one ...
The Tango 14 family of quad band GSM/GPRS/3G ...
Description:
The Tango 14 family of quad band GSM/GPRS/3G antennas is Siretta’s lowest profile design. At its highest point it is only 18 mm high and can be mounted securely internally or externally. An M12 screw thread provides simple, secure mounting ...
The Omron conductive electrode set is a 3-pole ...
Description:
The Omron conductive electrode set is a 3-pole holder made from phenolic resin. It is supplied with 1m long electrodes, which may be cut to the required length. It is used in water supply and drainage control in buildings. • ...