TE Connectivity 15 Way Flat Ribbon Cable, Series FLEXSTRIP, 76.2mm

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Jumper Leads

FLEXSTRIP® jumpers are multi-conductor board- to -board interconnect devices. They provide a convenient, reliable alternative to conventional point to point wiring for high density, high vibration PCB interconnections. Two types are available: those made from Nomex material are suitable for standard applications where changes of direct resistance due to humidity are not critical; those made from PTFE are ideal for high electrical and mechanical performance applications.

The product can be repeatably flexed without failure, reliable vibration- and break proof connection
No long preparation times for connecting PCBs, no cutting into sections, no preliminary work
Can be installed by most commonly used soldering techniques
High processsing speed,e.g soldering all the wiring points in the soldering bath simultaneously

Note

These jumpers are suitable for use with the FLEXSTRIP® sockets range

//media.rs-online.com/t_line/L299102-01.gif
Specificaties
Kenmerk Waarde
Number of Ways 15
Pitch 2.54mm
American Wire Gauge 24
Reel Length 76.2mm
Voltage Rating 300 V
Hi-Flex Yes
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Capacitance 11.2 pF/ft
High Density Yes
Series FLEXSTRIP
Characteristic Impedance 117 Ω
48 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Bag of 10
41,59
(excl. BTW)
50,32
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
41,59 €
4,159 €
*prijsindicatie