- RS-stocknr.:
- 104-581
- Fabrikant:
- RS PRO
90 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1970 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 10)
€ 1,319
(excl. BTW)
€ 1,596
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
10 - 90 | € 1,319 | € 13,19 |
100 - 490 | € 1,193 | € 11,93 |
500 - 2490 | € 1,038 | € 10,38 |
2500 - 4990 | € 0,888 | € 8,88 |
5000 + | € 0,745 | € 7,45 |
*prijsindicatie |
- RS-stocknr.:
- 104-581
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- KR
Productomschrijving
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Specificaties
Kenmerk | Waarde |
---|---|
Voltage Rating | 12 V |
Lamp Base | E5 |
Current Rating | 83 mA |
Diameter | 5.7мм |
Lamp Size | T1 1/2 |
Length | 17.5 mm |
Lens Colour | Clear |
Luminosity | 2.4 lm |
Life Hours | 10000h |