3M Connector Holder FC, SC, ST Series, for use with Local Area Network

  • RS-stocknr. 267-8087
  • Fabrikantnummer 80-6113-1476-8
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.

Note

Hot Melt ST Connectors have a loss repeatability of 0.2dB, 1000 matings,>while Hot Melt SC Connectors have >0.2dB, 200 matings.

Specificaties
Kenmerk Waarde
Accessory Type Connector Holder
Series FC, SC, ST
For Use With Local Area Network
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24/03/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 4)
490,61
(excl. BTW)
593,64
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
4 - 16
490,61 €
1.962,44 €
20 - 36
473,693 €
1.894,772 €
40 - 156
457,905 €
1.831,62 €
160 +
443,13 €
1.772,52 €
*prijsindicatie
Related Products
1 and 3RU frames with space saving designIdeal ...
Description:
1 and 3RU frames with space saving designIdeal for cramped rack applications such as OB truck I/O panels Best cable bend protection for mated cables due to 45° angled outlet positionFrames can be equipped with different plates.
Fibre applications as drop down or stage boxes ...
Description:
Fibre applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. This sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of ...
Rubber coated, pollutant-protection cover for opticalCON cable connectors ...
Description:
Rubber coated, pollutant-protection cover for opticalCON cable connectors Includes front housingErgonomic rubber boot can be safely locked with the spring loaded push/pull mechanism of the cable connector front Protects the fibre ferrules of any contamination especially during spooling of cables ...
Our Din Rail splice box offers a wide ...
Description:
Our Din Rail splice box offers a wide range of flexibility to the end user. The standard enclosure includes a hinged splice holder house up to 12 splice protectors, and 1 cable gland for incoming. Din Rail mountingTop and bottom ...