Molex Crimp Extraction Tool for HANDTOOL Series, Contact size 22 → 14AWG

  • RS-stocknr. 511-0089
  • Fabrikantnummer 63813-1500
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

MX150L and MX150 Terminal Tooling

This range of Molex Hand Crimp tools are suitable for MX150 and MX150L Sealed Rectangular Connector (SRC) system contacts. A full cycle with ratcheting action for a complete crimp is provide by these T9999 Series hand tools. The Type 4A Crimper has an ergonomic handle design with simple contact positioning.

Note

For applicable MX150L contacts see stock number 511-0017 typical.
For applicable MX150 contacts see stock number 720-5710 for female and 720-5700 for male typical.

Molex MX150L Sealed Connector System

Rugged, environmentally sealed connector system tested to IEC IP 67 that supports both low level signal and power applications up to 18 amps. Applications include: automotive, industrial control, video surveillance, outdoor lighting and machine tools.

Connector housings and seals pre-assembled
2 to 10 Circuit
IP67 rated
Integral Locking Latch
14-16 and 18-22 AWG options

Specificaties
Kenmerk Waarde
Contact Size 22 → 14AWG
Series HANDTOOL
Series Number T0201
18 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
24,10
(excl. BTW)
29,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
24,10 €
10 - 24
22,77 €
25 - 49
21,43 €
50 - 99
20,75 €
100 +
19,00 €
Related Products
A set of low cost hand crimp tools ...
Description:
A set of low cost hand crimp tools for the solid contacts required for the Deutsch IMC and Quick Connect (QC) range of connectors.
This KK series interconnection system provides an economical ...
Description:
This KK series interconnection system provides an economical and simple method of achieving wire to board and board to board connections. Particularly suited to applications where greater creepage and clearance distance are required, the 5.08mm pitch utilises the same crimp ...
An assembly tool for fitting the solder caps ...
Description:
An assembly tool for fitting the solder caps into right angle MCX plugs. Fitting instructions: position the cap in the connector body. Slide the assembly tool onto the body grooves of the connector. Turn the tool handle to press fit ...
Designed for industrial use where heat, dust, moisture ...
Description:
Designed for industrial use where heat, dust, moisture and common oils and chemicals are prevalent, this range offers compact multipole connection where space is at a premium. Typically, these connectors are suitable for use on test equipment, industrial sensors, medical ...