RS PRO Stainless Steel Extension Spring, 35mm x 7mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Stainless Steel Extension Springs

Extension springs are coiled attached by two components from both ends of the spring. When pulled apart the extension springs pull them back together again. The springs tension can be adapted depending on the applications load requirements.

Features and Benefits

Absorb and store energy
Pulling force resistance
Wound springs to oppose extension
Available in various sizes

Applications include:

Automotive interiors and exteriors
Garage door assemblies
Vise-grip pliers
Trampolines
Washing devices
Farm machinery

Standards

Material to DIN 17224 No. 1 4310 or BS2056 EN58A with a right hand helix
All dimensions conform to DIN 2097 (Grade 2)

Specificaties
Kenmerk Waarde
Material Stainless Steel
Free Length 35mm
Maximum Extended Length 101.50mm
Outside Diameter 7mm
Wire Diameter 0.63mm
Initial Tension 1N
Spring Rate 0.13N/mm
150 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
920 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,672
(excl. BTW)
0,813
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,672 €
6,72 €
*prijsindicatie
Related Products
Manufactured from high tensile strength piano/music wire, with ...
Description:
Manufactured from high tensile strength piano/music wire, with a right-hand (clockwise) helix and looped ends. Attached at both endsSprings absorb and store energyCreate resistance to pulling forceInitial tension manipulation can achieve individual requirementsWound to oppose extension.