Enclosure Heater, 100W, 110 → 240 V, 165 x 75 x 101mm

  • RS-stocknr. 726-8834
  • Fabrikantnummer 3105360
  • Fabrikant Rittal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Enclosure Heaters - SK Series

Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting plate
PTC technology with Computational Fluid Dynamics assisted design for superior heating performance
Requires external Thermostat and or Hygrostat to regulate heating in the enclosure
Fan assisted heat flow on models 200W and above

DIN Rail Mount Enclosure Heaters

Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Specificaties
Kenmerk Waarde
Output Power 100W
Supply Voltage 110 → 240 V
Depth 101mm
Height 165mm
Width 75mm
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
202,22
(excl. BTW)
244,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
202,22 €
10 - 24
195,36 €
25 +
185,05 €
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Suitable for both 50Hz or 60Hz operationDuty cycle 100%Heating element is PTC (positive temperature coefficient), temperature regulatingCan be ...
Touch-Safe heaters are designed for use in every ...
Description:
Touch-Safe heaters are designed for use in every application and area where enclosures and cases that house electrical / electronic components must be heated to avoid condensation and low temperatures. The aluminium heater body is covered with a plastic housing. ...
Touch-safe heater for the use in enclosures with ...
Description:
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.