Enclosure Heater, 110 → 250 V ac, 150 x 60 x 90mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Schneider Electric Enclosure Heaters

The Schneider Electric is an enclosure heater that belongs to the ClimaSys CR series. This is a compact resistant heater for prevention of formation of condensation due to low temperature. The mounting dimensions of this heater are 90mm depth, 60mm width and 150mm height. It has 100W output power.

Features and Benefits

• Ambient temperature ranges between -40°C and 70°C
• High thermal efficiency
• Humidity in the switchboard can be precisely controlled

Certifications

• CE certified
• IP20 rated
• UL approved
• VDE approved

Specificaties
Kenmerk Waarde
Input Power Rating 100W
Supply Voltage 110 → 250 V ac
Surface Temperature +70 (Operation)°C
Depth 90mm
Height 150mm
Width 60mm
Frequency 50/60Hz
Series ClimaSys CR
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
115,00
(excl. BTW)
139,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
115,00 €
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Self regulating PTC heaterProtection Class IILead wire silicone, UL 3135, white, AWG20, Length = 100±5mmTermination 6mm splice crimp. ...
Adaptable water heaters which can be used to ...
Description:
Adaptable water heaters which can be used to supply more than one outlet at a time making them especially suitable for washrooms etc. Economical, no standing heat lossDouble pole thermal cut-out protectionFast responseNeon power-on indicatorCan use existing taps, especially spray ...
Designed to be mounted under sinks, will provide ...
Description:
Designed to be mounted under sinks, will provide a cost effective solution where there are one or more outlets to supply. Ideal for mixer taps.,10 litre: will supply 3 basins with spray taps, or 2 basins with ordinary taps.,15 litre: ...
The EW has been designed to provide stored ...
Description:
The EW has been designed to provide stored hot water from a mains pressurised water supply, where there''s no requirement for a temperature/pressure relief device, making installation simple. Hot water to up to four outletsBalanced supply of hot and cold ...