Enclosure Heater, 20W, 230 V ac, 70 x 65 x 67mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

HVR Pentagon Anti-Condensation Heaters

HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 terminal screws are provided on the resistor. Applications include switch and control gear cubicles.

Vitreous enamelled resistor mounted in a sheet steel case.
Removable perforated sheet steel cover.

Note

The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.

//media.rs-online.com/t_line/L603328-02.gif
Specificaties
Kenmerk Waarde
Output Power 20W
Input Power Rating 20W
Supply Voltage 230 V ac
Surface Temperature 45°C
Depth 67mm
Height 70mm
Width 65mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04/11/2019, met een levertijd van 1 werkdag.
Prijs Each
24,63
(excl. BTW)
29,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
24,63 €
10 - 24
23,80 €
25 - 49
22,54 €
50 - 99
20,88 €
100 +
18,77 €
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Suitable for both 50Hz or 60Hz operationDuty cycle 100%Heating element is PTC (positive temperature coefficient), temperature regulatingCan be ...
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty ...
Description:
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty cycle 100%Heating element is resistance type with temperature monitorFitting position is airflow vertical, exit at topAirflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodisedBinding post connection capacity: single ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. High power to size ratio - 3 power settingsLightweight and easy to fitHarness length 240mmElectrical Protection Class IIIndependent ...