RS PRO Emergency Light Conversion Kit for use with Emergency Lighting
- RS-stocknr.:
- 466-3346
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 466-3346
- Fabrikant:
- RS PRO
N.v.t.
- Land van herkomst:
- GB
RS PRO 70 W Emergency Light Conversion Kit, 150 mm x 44 mm x 35 mm
With this emergency light conversion kit from RS PRO, you can convert fluorescent luminaires without compromising on safety. Failure of the light's unswitched supply will switch the light onto a battery supply. The module and battery packs fit inside most modern fluorescent batten fittings.
With a fused terminal block and pre-cut connection wires included, this kit is suitable for integrating into existing control gear. In addition, the module can be tuned specifically to the lamp, which offers better performance for the cell capacity. It comes with an LED for fitting into the luminaire to indicate battery charge.
The kit has been tested against international standards for safe lamp control gear (EN 61347-2-7), safe luminaires (EN 60598-2-2) and suitability for conversion to emergency lighting (ICEL 1004). It also meets requirements on automatic testing (BS5266-1:2005/IEC62034). This kit can be used for converting luminaires to emergency lighting in premises of all kinds.
With a fused terminal block and pre-cut connection wires included, this kit is suitable for integrating into existing control gear. In addition, the module can be tuned specifically to the lamp, which offers better performance for the cell capacity. It comes with an LED for fitting into the luminaire to indicate battery charge.
The kit has been tested against international standards for safe lamp control gear (EN 61347-2-7), safe luminaires (EN 60598-2-2) and suitability for conversion to emergency lighting (ICEL 1004). It also meets requirements on automatic testing (BS5266-1:2005/IEC62034). This kit can be used for converting luminaires to emergency lighting in premises of all kinds.
Features and Benefits
• Emergency light conversion kit
• Length of 150 mm
• Width of 44 mm
• Height of 35 mm
• Fixing centres 140 mm apart
• Maximum wattage of 70 W
• Voltage rating of 220-240 V ac at 50/60 Hz
• Maximum supply current of 40 mA
• Maximum operating temperature of +50˚C
• Minimum operating temperature of 0˚C
• Maximum case temperature of +70˚C
• Conductor size of 0.5 mm² to 1.5 mm²
• M4 mounting screws
• Meets standard EN 61347-2-7 as safe lamp control gear
• Complies with standard EN 60598-2-2 as a safe luminaire
• Conforms to ICEL 1004 on conversion to emergency lighting
• Meets BS 5266-1:2005/IEC 62034 on automatic testing
• Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) compliant
• Length of 150 mm
• Width of 44 mm
• Height of 35 mm
• Fixing centres 140 mm apart
• Maximum wattage of 70 W
• Voltage rating of 220-240 V ac at 50/60 Hz
• Maximum supply current of 40 mA
• Maximum operating temperature of +50˚C
• Minimum operating temperature of 0˚C
• Maximum case temperature of +70˚C
• Conductor size of 0.5 mm² to 1.5 mm²
• M4 mounting screws
• Meets standard EN 61347-2-7 as safe lamp control gear
• Complies with standard EN 60598-2-2 as a safe luminaire
• Conforms to ICEL 1004 on conversion to emergency lighting
• Meets BS 5266-1:2005/IEC 62034 on automatic testing
• Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Kenmerk | Waarde |
|---|---|
| For Use With | Emergency Lighting |