Kewtech Corporation KT63 Electrical Tester

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

KT63 Multifunction 5-1 tester

The KT63 Multifunction Tester is the perfect 17th Edition tester for electricians wanting to test and certify electrical installations in both domestic and commercial properties.

The KT63 Multifunction Tester offers a variety of tests including Continuity, Insulation, Auto RCD and Non-Trip Loop Testing all in compliance with Part P and BS7671 regulations
The KT63 Tester provides simple test selection and operation functions with a large screen for clearly displaying test results. Additional features including a hands-free testing mode make this a fast and accurate multifunction tester that offers an affordable option for installers and commissioning engineers.
Full no trip loop testing on all types of RCD
Displays PFC/PSC at the same time as the loop impedance reading
250V, 500V and 1000V insulation testing with auto discharge
Auto null eliminates test lead resistance when continuity testing
Auto RCD test mode for 30mA RCDs
RCD ramp test
Hands-free mode
Mains polarity test

Supplied with

ACC063 distribution board test lead set, kamp 12 mains lead, batteries, printed instruction manual, carry case

Kewtech Corporation Electrical Tester

The Kewtech Corporation electrical installation tester is multifunction 5 in 1, 17th edition RS calibrated tester. It is for electricians wanting to test and certify electrical installations. The KT63 multifunction tester offers a variety of tests including continuity, insulation, auto RCD and non-trip loop testing all in compliance with Part P and BS7671 regulations. The KT63 tester provides simple test selection and operation functions with a large screen for clear displaying test results. Additional features including a hands-free testing mode make this a fast and accurate multifunction tester is an affordable option for installers and commissioning engineers.

Features and Benefits

Easy to use New anti-trip technology loop test for full no trip loop testing on RCDs of all types Low susceptibility of RCD uplift and noise interference Displays PFC/PSCat the same time as loop reading 250 / 500 / 1000V insulation test with auto discharge Test leads auto-null for continuity mode RCD auto test mode for 30mA RCDs RCD ramp test function End of line calibration certificate included Hand-free mode controlled by separate button Single rotary dial for function selection Mains polarity test

Applications

Commercial Domestic

Certifications

IP54 rated

Electrical Installation Testers and Accessories

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 3 Wire
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 1000V dc
Maximum Voltage Measurement 250V
Test Type Continuity
Continuity Test Current 200mA
RCD Test Type AC Type
Test Standards BS 7671
Power Source Battery
IP Rating IP54
Minimum Continuity Resistance 9.99Ω
Model Number p KT63
Maximum Continuity Resistance 1999Ω
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
539,50
(excl. BTW)
652,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
539,50 €
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
The PROFITEST XTRA M500Y Profi PackageInstallation Test Kit ...
Description:
The PROFITEST XTRA M500Y Profi PackageInstallation Test Kit comprises a M520P test instrument along with a VARIO plug adapter set, E-Clip 2 generator clamp for earthing measurements, Z3512A clamp for earthing measurements, PRO RE2 measuring adapter for 2-clamp measuring methods, ...
Using FieldSense Technology the T6-1000 measures voltage up ...
Description:
Using FieldSense Technology the T6-1000 measures voltage up to 1000 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as ...