Steel,Lockable, Lock not included Latch

  • RS-stocknr. 687-124
  • Fabrikantnummer 40062 ZB
  • Fabrikant Savigny
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Zinc Passivate/Stainless Steel Toggle

Suitable for screw fixing (M4 screws).

Two adjustable latches (range 6.0mm) with manual safety lock
In the open position the latch lies flat to minimise accidental damage
Maximum operating tension of 300kgf
The manual safety button has to be pulled back at the same time as the lever is lifted for the latch to be released
Stainless steel 18//8 assembly rivets

Supplied with

dimensions template for marking out.

//media.rs-online.com/t_line/L687124-01.gif
Specificaties
Kenmerk Waarde
Material Steel
Lockable Lock Not Included, Yes
Adjustable Yes
Operating Tension 300.0kgf
Dimensions 74 x 28 x 19.5mm
Depth 19.5 mm
Length 74.0mm
Width 28.0mm
62 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
9,15
(excl. BTW)
11,07
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
9,15 €
18,30 €
10 - 18
8,69 €
17,38 €
20 - 58
8,23 €
16,46 €
60 +
7,685 €
15,37 €
*prijsindicatie
Related Products
Miniature, fully enclosed latch with a spring mechanism ...
Description:
Miniature, fully enclosed latch with a spring mechanism which gives a wide positioning tolerance. Concealed catch plate with assembly rivetsCompression springs made in stainless steel 18//8Weld or M3 screw fixing15kgf operating tensionLatch to catch distance 25.5mm.
Base plate has slotted fixing holes for positional ...
Description:
Base plate has slotted fixing holes for positional adjustment. Latch can be utilised for gripping in groove without use of catch plate. Curved link gives wider toleranceSuitable for medium duty applicationsZinc plated steelSuitable for screw fixing using 2xM5 screws for ...
Available with or without padlock facilityInterchangeable with American ...
Description:
Available with or without padlock facilityInterchangeable with American models Wide positioning tolerance created by spring mechanismFailsafe design prevents over extension of links Operating tension is 35kgf when X= 87mm (see line drawing)Available in zinc passivated steel or A2 stainless steelSuitable ...
Available with or without padlock facilityInterchangeable with American ...
Description:
Available with or without padlock facilityInterchangeable with American models Wide positioning tolerance created by spring mechanismFailsafe design prevents over extension of links Operating tension is 35kgf when X= 87mm (see line drawing)Available in zinc passivated steel or A2 stainless steelSuitable ...