Wago, 260 Series , 400 V Terminal Strip, Cage Clamp Termination

  • RS-stocknr. 914-8435
  • Fabrikantnummer 260-311
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

Cage Clamp - 260 Series

Cage clamp® connection terminal blocks with side entry are screwdriver actuated and include fixing flanges at either end of the terminal block. A DIN Rail mounting adapter is also available which screw mounts into the base of the terminal blocks. It is recommended that the maximum distance between adapters is 35-40 mm.

Features and Benefits

• 2 Conductor-through terminal block
• 6 kV surge voltage
101-3877 is a mounting foot with screw for DIN 35 rail

260 Series

Specificaties
Kenmerk Waarde
Series 260
Wire Size 28 → 16 AWG
Cable CSA 0.08 → 1.5mm²
Colour Grey
Current Rating 10 (UL) A, 15 (CSA) A
Number of Levels Single
Termination Method Cage Clamp
Voltage Rating 400 V
200 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,737
(excl. BTW)
0,892
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,737 €
7,37 €
*prijsindicatie
Related Products
The Optocoupler Terminal Block is a rail mounted ...
Description:
The Optocoupler Terminal Block is a rail mounted standard terminal block with miniature switching relay and optocoupler for low switching power. 2.5mm squared conductor area, clamp wire connection methods, front-entry wiring type M and grey in colour. • Industrial.
Sectional terminal blocks with disconnect tab. • DIN ...
Description:
Sectional terminal blocks with disconnect tab. • DIN Rail mounting on TS 35 DIN Rail• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring. ...
DIN Rail terminals have a modular design with ...
Description:
DIN Rail terminals have a modular design with a 5 mm width. The standard 'centre' terminals have a tab mating facility, with the 'end' terminals having flanges for M4 fixing (Ø 4.2 mm). Centre and end terminals can easily be ...
Terminal blocks for TS 35 DIN Rails use ...
Description:
Terminal blocks for TS 35 DIN Rails use CAGE CLAMP® technology and are 30% smaller than standard terminal blocks. • 2 Conductors• Direct plug-in of rigid and flexible conductors with end tips, no tools required• Simple and quick bridging and ...