Wago, 264, 800 V Din Rail Terminal

  • RS-stocknr. 484-3889
  • Fabrikantnummer 264-701
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

264 Miniature Series

Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact area, and compensates for any deformation of the conductor due to cold flow or settling of strands.

Features and Benefits

• Available in 3 colours
• Moulded in modified nylon 6.6 (free from halogen)
• Self-extinguishing according to UL94-V2
• Temperature stabilised allowing continuous operation at 105°C (170°C short term) according to IEC216 part 1 and 2
• Terminals interlock and are designed to prevent reverse mounting
• 24.5 mm Depth
• Rated at 600 V (UL)
• The green/yellow earth terminal blocks connect directly to the mounting rail

Note

To ensure a high level of safety and security it is essential that only 1 conductor is inserted in each terminal. However, when jumper bars are used to common terminals a conductor of not more than 1.5mm² may be inserted between the jumper and the outer edge of the terminal block

Approvals

UL recognised component, CSA certified, DEMKO (except 264-727), KEMA, SEMKO.

//media.rs-online.com/t_line/L460418-02.gif
Specificaties
Kenmerk Waarde
Series 264
Wire Size 28 → 12 AWG
Cable CSA 0.08 → 2.5mm²
Colour Grey
Current Rating 20A
Number of Levels Single
Voltage Rating 800 V
Pitch 6mm
470 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4830 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,647
(excl. BTW)
0,783
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,647 €
6,47 €
*prijsindicatie
Related Products
Triple decker for improved connection density in sensor/actuator ...
Description:
Triple decker for improved connection density in sensor/actuator appplicationsAll levels can be cross connected using Jumper Bar 3 in 1 out design makes providing common potentials simple24V PNP/NPN versions have internally connected red LED All three levels can accommodate 5mm ...
An additional selection of 2.5 and 4mm² terminals ...
Description:
An additional selection of 2.5 and 4mm² terminals in useful colours including the newphase colours black, brown and grey, as well as white, orange, yellow and red. Identify signals or voltages easilyTerminal colours match incoming cables, reducing wiring errorThree phase ...
Feed-through connections for mounting on DIN-type rails. These ...
Description:
Feed-through connections for mounting on DIN-type rails. These conductor-through terminals feature cage clamp technology for ultra-quick connection. The terminal blocks are front-wired. • 28 - 12 AWG• 800 V measured voltage• 8 k V measured shock voltage• 24 A Current ...
ABB series of Fused terminals with a lever ...
Description:
ABB series of Fused terminals with a lever action fuse carrier, the standard product accepts both 20´5mm and 25´5mm fuses whilst terminals with ’fuse failed’ indication are suited to 20´5mm fuse links only.Fuse failed indication terminals are available either a ...