Phoenix Contact ATEX, UK 6 N Series , 800 V Standard Din Rail Terminal, Screw Down Termination

Datasheets
Wetgeving en conformiteit
Niet conform
Productomschrijving

Universal Terminals

Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.
Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way insertion (jumper) bridge is also available, as is a 35mm rail end bracket.

Individual terminals and complementary accessories

Approval Category II 2 GD EEx e II Cert. No. KEMA 98ATEX1651U

Approvals

E Exei/II; KEMA

Specificaties
Kenmerk Waarde
Series UK 6 N
Wire Size 24 → 8 AWG
Cable CSA 0.2 → 6mm²
Colour Grey
Current Rating 41A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 800 V
Hazardous Area Certification ATEX
1920 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1200 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
1,505
(excl. BTW)
1,821
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
1,505 €
15,05 €
100 - 240
1,43 €
14,30 €
250 +
1,355 €
13,55 €
*prijsindicatie
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Disconnect terminal blocks enable you to rapidly localise ...
Description:
Disconnect terminal blocks enable you to rapidly localise system faults, and permits inspection work to be carried out under zero voltage conditions. A standard height version for 2.5mm² wire, and a double-deck version for 4.0mm² wire is availableColour grey.
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal. Saving substantial time in comparison to other screw terminals. Terminals available in a range of coloursScrew-in and a plug-in cross ...
A highly flexible system of terminal blocks featuring ...
Description:
A highly flexible system of terminal blocks featuring a disconnectable plug-in zone and 4 connection methods: screw (UT), spring-cage (ST), push-in (DT) and self-stripping (QT). The entire range is standardised. These four connections methods can be freely combined to connect ...