Entrelec, SNA Series , 800 V ac Standard Din Rail Terminal, Screw Clamp Termination
- RS-stocknr. 303-6412
- Fabrikantnummer 1SNA115320R2700
- Fabrikant Entrelec
Spring Loaded Terminal (Feedthrough and Test)
Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw clamp, the other on the underside of the clamp. For use with Top Hat DIN rails,2 and 4 pole sliding bridges are available for use with current transformer test terminal (stock no. 383-1403)
Approvals
7777
5000 Universal Series
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. Cable entry and clamp design allows easy installation, higher voltage and cable carrying capacity. Cable markers are available RS 460-569
Note
Stock numbers 472-9569 and 472-9575 are compatible with deep top hat rails only
| Kenmerk | Waarde |
|---|---|
| Series | SNA |
| Cable CSA | 10mm² |
| Colour | Grey |
| Current Rating | 41A |
| Number of Levels | Single |
| Termination Method | Screw Clamp |
| Voltage Rating | 800 V ac |
| Pitch | 10mm |
| Minimum Operating Temperature | -5°C |
| Maximum Operating Temperature | +40°C |
