RS PRO, 800 V Standard Din Rail Terminal, Screw Termination

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Standard Feed Through

DIN rail mounted terminals, with universal mounting foot clips to both ’G’ profile (asymmetric to BS5825:1990) and ’top hat’ profile (symmetric to BS5584:1978) rails, with a range of features to suit all applications. The 2.5 to 10mm² terminals have common end covers and partitions, there are 10 pole Jumper Bars available for cross connection and are easily fitted with markers on either side.

Note

Please see jumper bars for compatibility

Approvals

UL, CSA, NEMKO, GOST

Approvals

UL Listed; CSA Certified; NEMKO

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Series RK
Wire Size 22 → 11 AWG
Cable CSA 0.2 → 4mm²
Colour Brown
Current Rating 40A
Termination Method Screw
Voltage Rating 800 V
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
140 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3170 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,773
(excl. BTW)
0,935
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,773 €
7,73 €
*prijsindicatie
Related Products
Glazed ceramic feed through terminals available in 2 ...
Description:
Glazed ceramic feed through terminals available in 2 sizes to fit the G-profile asymmetric rail to BS5825:1980, EN 50035. A maximum operating temperature of 250°C is achievable for continual use providing the correct end brackets are used. Terminal Pitch 8 ...
DIN Rail grounding terminal blocks are a great ...
Description:
DIN Rail grounding terminal blocks are a great solution for space saving and downsizing in control panels, due to their compact size of 3.5 mm width. The XW5G series terminal blocks are easy to install and wires are held firmly ...
Modular two-tier terminal blocks can feed two potentials ...
Description:
Modular two-tier terminal blocks can feed two potentials in one terminal. Both screw and plug-in version available. • Compact length only 60 mm• Pluggable cross connects saving time• Flammability rating UL94V 0.
Feed through block with screw connection for mounting ...
Description:
Feed through block with screw connection for mounting on TS35Nominal cross section: 10 mm²Maximum current: 76A/16 mm²Connection capacity: 2 wires, equal size 0.5 - 6 mm²For the compatible WT 10 PE earth (ground) block, please see RS 811-3823.