PCB Carrier 107mm Base with Foot 18.5mm

  • RS-stocknr. 752-7619
  • Fabrikantnummer CIME/E/BEF1850S/PK5
  • Fabrikant CAMDENBOSS
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Euro Series 107mm Empty Modular Interface Supports

The Euro Series Empty Modular Interface Supports are designed to accommodate 107mm wide PCB’s. The modular construction of these PCB carriers means they can accommodate various lengths of PCB’s.

Suitable for 107mm width PCB’s
Modular construction for easy assembly
Snap fit Din Rail mounting fixtures
Moulded in green UL 94V0 flame retardant PA
Terminal blocks available in same colour
Integral marker facility
Integral Din rail mounting clip

1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,03
(excl. BTW)
9,72
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
8,03 €
15 - 24
7,64 €
25 +
7,38 €
Related Products
Feed-through terminal blocks with cage clamp® connection. • ...
Description:
Feed-through terminal blocks with cage clamp® connection. • DIN Rail type TS 35• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring.
Universal modules designed to accommodate one PCB. They ...
Description:
Universal modules designed to accommodate one PCB. They comprise several individual base elements connected by metal pins giving the finished unit stability. 192-2771 incorporates a DIN rail mounting foot, which snap fits onto EN mounting rails. The side elements close ...
Terminal blocks with a plug/socket arrangement which allow ...
Description:
Terminal blocks with a plug/socket arrangement which allow the block to be separated into two halves, isolating the plug strip without the need to remove each connection individually. • High current-carrying capacity for the requirements of connectors which can be ...
The labeling areas of wired multi-level terminal blocks ...
Description:
The labeling areas of wired multi-level terminal blocks are increased by using marker carriersDepending on version, the marker carriers are inserted in the holders on the upper terminal block levelLength: 26mm Height: 19mm Width: 4mm.