CAMDENBOSS Wall Mounting Plate for 72mm wide PCBs

  • RS-stocknr. 752-7606
  • Fabrikantnummer CIME/M/MPR/PK5
  • Fabrikant CAMDENBOSS
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Mini Series 72mm Empty Modular Interface Supports

The Mini Series Empty Modular Interface Supports are designed to accommodate 72mm wide PCB’s. The modular construction of these PCB carriers means they can accommodate various lengths of PCB’s.

Suitable for 72mm width PCB’s
Modular construction for easy assembly
Snap fit Din Rail mounting fixtures
Moulded in green UL 94V0 flame retardant PA
Wall mounting kit option
Terminal blocks available in same colour
Integral marker facility
Registered design no: 2106418®
Also available in different colours
End section foot for top hat DIN rail

Specificaties
Kenmerk Waarde
Accessory Type Wall Mounting Plate
For Use With 72mm wide PCBs
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was 2,59 €
2,46
(excl. BTW)
2,98
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
2,46 €
15 - 24
2,34 €
25 +
2,27 €
Related Products
This RS PRO C profile slotted DIN rail ...
Description:
This RS PRO C profile slotted DIN rail kit comes complete with 4x1m length support rails, 1 pack of 25 caged nuts (M6 N-type) and 1 panel screw kit containing 25 steel pan head screws, M6x12 mm and washers). This ...
ABB R600 series interface relays are used for ...
Description:
ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation. Screw or ...
Cover for the last terminal in a blockFor ...
Description:
Cover for the last terminal in a blockFor separations within one terminal block with terminals of different sizesTouch-protected live partsVisual separation of current circuitsEnd plates can also be used to ensure compliance with air gaps and creep distancesThe outer dimensions ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...