Wago, End Stop, 249 Series

  • RS-stocknr. 484-3930
  • Fabrikantnummer 249-101
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

264 Miniature Series

Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact area, and compensates for any deformation of the conductor due to cold flow or settling of strands.

Features and Benefits

• Available in 3 colours
• Moulded in modified nylon 6.6 (free from halogen)
• Self-extinguishing according to UL94-V2
• Temperature stabilised allowing continuous operation at 105°C (170°C short term) according to IEC216 part 1 and 2
• Terminals interlock and are designed to prevent reverse mounting
• 24.5 mm Depth
• Rated at 600 V (UL)
• The green/yellow earth terminal blocks connect directly to the mounting rail

Note

To ensure a high level of safety and security it is essential that only 1 conductor is inserted in each terminal. However, when jumper bars are used to common terminals a conductor of not more than 1.5mm² may be inserted between the jumper and the outer edge of the terminal block

Approvals

UL recognised component, CSA certified, DEMKO (except 264-727), KEMA, SEMKO.

//media.rs-online.com/t_line/L460418-02.gif
Specificaties
Kenmerk Waarde
Accessory Type End Stop
Series 249
For Use With Terminal Block
1010 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
740 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,424
(excl. BTW)
0,513
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,424 €
4,24 €
*prijsindicatie
Related Products
For standard range of DIN rail terminals. Supplied ...
Description:
For standard range of DIN rail terminals. Supplied as cards of 100 and marked 1 to 100 or blank, in 5mm or 6mm pitch. 5mm markers are suitable for consecutively marking terminals of 5mm width. 6mm markers are for terminals ...
DIN Rail terminals have a modular design with ...
Description:
DIN Rail terminals have a modular design with a 5 mm width. The standard 'centre' terminals have a tab mating facility, with the 'end' terminals having flanges for M4 fixing (Ø 4.2 mm). Centre and end terminals can easily be ...
These screwless spring cage clamp terminals are specifically ...
Description:
These screwless spring cage clamp terminals are specifically designed for use with 'Top Hat' rail.,The top entry conductor connection is simplicity itself; a flat-bladed screwdriver will ease the spring clamp apart ready for conductor insertion.The range covers conductor sizes from ...
Z’ Roof - the compact alternative offering a ...
Description:
Z’ Roof - the compact alternative offering a solution for small switchgear cabinets and similar applications. Angled insertion of screwdriverReduction in conductor length of up to 36%Width 5mm, length 50.5mm, height 43mm Rated at 24A.