Weidmuller, End Plate, AP Series

  • RS-stocknr. 823-364
  • Fabrikantnummer AP AKZ4 -294460000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: RO
Productomschrijving

AKZ Miniature Series

Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium.

Features and Benefits

• Moulded in polyamide 6.6 with tin plated brass contacts
• Suited to a temperature range of -50°C to +100°C

Note

Voltage and current ratings are with respective to VDE

Approvals

(1) CSA certified, (2) UL recognised

Approvals

8888

AKZ Miniature Series

Approvals

(1) CSA certified, (2) UL recognised

Warning

  • Isolating terminals must only be used for isolating sections of a circuit for test purposes. They must NOT be used to switch services on or off when power is applied.
Specificaties
Kenmerk Waarde
Accessory Type End Plate
Series AP
For Use With Terminal Block
90 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
830 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,523
(excl. BTW)
0,633
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,523 €
5,23 €
*prijsindicatie
Related Products
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 2.5 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
Glazed ceramic feed through terminals available in 2 ...
Description:
Glazed ceramic feed through terminals available in 2 sizes to fit the G-profile asymmetric rail to BS5825:1980, EN 50035. A maximum operating temperature of 250°C is achievable for continual use providing the correct end brackets are used. Terminal Pitch 8 ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
Terminal block with two separate tiers offering maximum ...
Description:
Terminal block with two separate tiers offering maximum space saving.This terminal block is fitted to a 15mm miniature DIN profile but may also be used on the 35mm omega profile.An end cover, and an intermediate plate to offset lateral shift ...