Siemens, SITOP PSU200M DIN Rail Power Supply, 24V dc Output Voltage, 5A Output Current

  • RS-stocknr. 828-5678
  • Fabrikantnummer 6EP1333-3BA10
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: RO
Productomschrijving

SITOP Modular Power Supply

The one, two and 3 phase SITOP modular units are the technology power supplies for demanding solutions. They offer maximum functionality for use in complex plants and machines. The wide-range input allows a connection to almost any electrical power system worldwide. The input ensures a high degree of safety even if there are large voltage fluctuations. They offer outstanding overload characteristics: Power boost delivers up to three-times the rated current for short periods of time. With extra power of 150%, loads with high power consumption can be connected without any problems. And if there is an overload, you can choose between constant current or automatic restart. The high efficiency keeps energy consumption and heat buildup in the control cabinet low, and the compact metal enclosure also saves space.

Features and Benefits

• Slim design • Power boost with 3 times rated current for tripping protective devices
• Extra power with 1.5 times rated current for brief functional overload
• Selectable short circuit response between constant current and restart
• Symmetrical load distribution can be selected for parallel operation
• Operating state on 3 LEDs
• High efficiency up to 94%
• Temperature range: -25°C to 70°C

Product Application Information

To increase the 24 V availability, the SITOP smart power supplies can be combined with buffer, DC UPS, redundancy and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, ATEX, IECEx, SEMI F47, GL, ABS

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 5 A
Power Rating 120W
Number of Outputs 1
Electrical Phase 1, 2
Type Switch Mode
Height 125mm
Width 121mm
Mounting Type DIN Rail Mount
Hazardous Area Certification ATEX
Series SITOP PSU200M
Ripple And Noise 50mV Pk-Pk
Depth 121mm
Output Voltage Adjustment Range 24 → 28.8V
Load Regulation 0.1%
Maximum Temperature +70°C
Minimum Temperature -25°C
29 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
143,00
(excl. BTW)
173,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
143,00 €
Related Products
The TIB series DIN Rail mounting power supplies ...
Description:
The TIB series DIN Rail mounting power supplies from TRACO POWER have been designed for industrial applications and electric control cabinets. Their reduced module width allows for minimum space occupation on the DIN Rail. Most efficient circuit topology keeps the ...
DC-DC Ultra slim Industrial DIN rail converter, Input ...
Description:
DC-DC Ultra slim Industrial DIN rail converter, Input 18-75Vdc, Single Output 24Vdc at 2.5A. Width only 52.5mm (3SU)4:1 ultra wide input range-40∼+85°C wide working temperature No minimum load requiredDC output adjustable ( 10% ±)Cooling by free air convectionCan be installed ...
High-end power supplies must perform efficiently and reliably, ...
Description:
High-end power supplies must perform efficiently and reliably, even in challenging industrial environments. This requires high power reserves, a long service life and optimal protection against overvoltage, vibration and extreme temperature conditions. New DCL technology gives PROtop an outstanding dynamic ...
SPD series switch mode power supplies provide the ...
Description:
SPD series switch mode power supplies provide the user with an Automation-specific designed unit suitable for a comprhensive range of applications. Mounting is made very simple thanks to DIN rail mounting, coupled with a compact construction this Power Supply series ...