Siemens, SITOP PSE202U Dual Redundancy Module, 24V dc Output Voltage, 10A Output Current

  • RS-stocknr. 769-7355
  • Fabrikantnummer 6EP1964-2BA00
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: AT
Productomschrijving

SITOP Accessories

Mounting Bracket

Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. The mounting bracket is suitable for control cabinets with a depth of 320 mm or more.

Mounting Adapter for Standard Mounting Rail

The single phase 6ES7305-1BA80-0AA0 and 6ES7307-1EA80-0AA0 PSUs are special mechanical versions for SIMATIC S7-300 and can be mounted on S7 rails.

A mounting adapter (6ES7390-6BA00-0AA0) for mounting on the standard mounting rail EN 60715 35 x 15 is separately available as an accessory.

The 6ES7307-1BA01-0AA0, 6ES7307-1EA01-0AA0 and 6ES7307-1KA02-0AA0 PSUs are variants for SIMATIC S7-300 and can be mounted on S7 rails.

A mounting adapter (6EP1971-1BA00) for installation on DIN Rail EN 60715 35´15/7.5 is separately available as an accessory.

Connection Plug for Devices with Degrees of Protection IP65 and IP67

For the maintenance free SITOP UPS500P DC UPS modules (6EP1933-2NC01, 6EP1933-2NC11) in IP65 degree of protection. A connector set (6EP1975-2ES00) for input and output and with a pre-assembled USB cable (2 m long) is available as an accessory.

Device Labels

Blank device labelling plates (20 x 7 mm, pastel turquoise) with 3RT1 900-1SB20 can be used for identification of the power supplies. The package unit comprises 340 labels on frames, 20 labels per frame. For usability, refer to "Accessories" in the technical data of the respective power supplies.

Specificaties
Kenmerk Waarde
Input Voltage 24V dc
Output Voltage 24 V dc
Output Current 10 A
Number of Outputs 1
Type Redundancy Module
Height 80mm
Width 80mm
Minimum Temperature -20°C
Maximum Temperature +70°C
Series SITOP PSE202U
Depth 100mm
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
45,00
(excl. BTW)
54,45
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
45,00 €
10 - 14
43,18 €
15 +
41,30 €
Related Products
Ultra Slim Design - 45 mm150% Peak Load ...
Description:
Ultra Slim Design - 45 mm150% Peak Load for 3 secondsAmbient Operation from -25 °C to +70 °CFull Load at 60 °C High Efficiency - Up to 94%Volt-Free Contact for DC OKSelectable Parallel Operation85 to 264 VAC Operation3 Year Warranty. ...
AC-DC Industrial 3-phase DIN rail power supply with ...
Description:
AC-DC Industrial 3-phase DIN rail power supply with PFC and Constant Current, Output 24VDc at 10A, DC OK. Three-Phase 340 550VAC wide range input (dual phase operation possible)63mm slim widthBuilt-in passive PFC function compliance to EN61000-3-2High efficiency 92% and low ...
A range of switch mode power supplies from ...
Description:
A range of switch mode power supplies from Omron with or without indication monitors and simple functions for easy system use.The units are suitable for household appliances and building automation controls which are increasingly required in commercial and residential premises. ...
The QUINT PS range of universal power supply ...
Description:
The QUINT PS range of universal power supply units from Phoenix Contact are designed for starting heavy loads with high inrush currents reliably using POWER BOOST power reserve.The DIN rail mounting, PSUs can be installed within the potentially hazardous area ...