TRACOPOWER TIB 080-EX Switched Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 12V dc dc Output, 6.7A Output,
- RS-stocknr.:
- 184-8531
- Fabrikantnummer:
- TIB 080-112EX
- Fabrikant:
- TRACOPOWER
104 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 107,65
(excl. BTW)
€ 130,26
(incl. BTW)
Aantal stuks | Per stuk |
1 - 9 | € 107,65 |
10 - 14 | € 102,27 |
15 + | € 96,89 |
- RS-stocknr.:
- 184-8531
- Fabrikantnummer:
- TIB 080-112EX
- Fabrikant:
- TRACOPOWER
Wetgeving en conformiteit
Productomschrijving
Traco Power DIN Rail Power Supply, 65Hz Input Frequency Maximum, 100mV Pk-Pk Ripple and Noise - TIB 080 Series - TIB 080-112EX
Keep equipment safely energised and on an even keel with this DIN rail power supply from Traco Power. It converts electricity sources between 85 and 264V AC to a rock-steady 12V DC to suit your setup. If you need a different output, it's a cinch to tweak the settings to deliver between 11.8 and 15V. An 88% efficiency rating means this power supply saves energy and cuts heat buildup out of the equation. With a mean time between failures exceeding 1.95 million hours, you can be sure it goes the extra mile.
Features & Benefits
• Snap-on mounting means it clips quickly onto a standard 35mm DIN rail
• Rugged stainless steel and aluminium case resists wear and tear in heavy-duty applications
• Reliable in temperatures between -40°C and +70°C so it's handy in tough conditions
• Screw terminals make wiring simple and installation quick
• Rugged stainless steel and aluminium case resists wear and tear in heavy-duty applications
• Reliable in temperatures between -40°C and +70°C so it's handy in tough conditions
• Screw terminals make wiring simple and installation quick
Applications
• Manufacturing facilities
• Telecommunications networks
• Automated systems
• Telecommunications networks
• Automated systems
Can I use this unit with stepper motors?
Yes, it can peak up to 150% for four seconds at a time, so it's ideal for stepper motors. You can also use it to power up solenoids and actuators.
Specificaties
Kenmerk | Waarde |
---|---|
Type | Switched Mode |
Output Voltage | 12V dc |
Output Current | 6.7A |
AC or DC Input Voltage | ac |
AC or DC Output Voltage | dc |
Input Voltage | 85 → 264V ac |
Power Rating | 80W |
Electrical Phase | 1 |
Number of Outputs | 1 |
Height | 114.2mm |
Width | 32mm |
Depth | 98.6mm |
Series | TIB 080-EX |
Hazardous Area Certification | ATEX |
Maximum Temperature | +70°C |
Special Features | Alternative Side-Mounting for Flat Panels, Back Power Immunity, High Power Factor by Active Power Correction, Slim Profile for DIN-Rail Mounting |
Standards Met | CE Certified, CSA C22.2 No 60950-1-03, cULus Recognized, EN 60079-0, EN 60079-15, EN 60079-7, EX II3G Ex ec nC IIC GC Class I, Division 2, IEC/EN 60950-1, UL 508, UL 60950-1 |
Output Voltage Adjustment Range | 11.8 → 15V |
MTBF | >1950000h |
Ripple And Noise | 100mV Pk-Pk |
Efficiency | 88% |
Minimum Temperature | -40°C |
Mounting Type | DIN Rail Mount |
Load Regulation | 0.5% |