Mean Well, HDR DIN Rail Power Supply, 12V dc Output Voltage, 7.1A Output Current

  • RS-stocknr. 145-7875
  • Fabrikantnummer HDR-100-12
  • Fabrikant Mean Well
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Mean Well HDR Series DIN Rail Power Supply

The HDR series PSU is an economical and ultra slim power supply which can be adapted to be installed on TS-35/7.5 or TS-35/15 DIN Rails. The body has a narrow width which allows for space saving within a cabinet. The HDR series power supply has been designed with plastic housing that can effectively prevent electrical hazards.

Features and Benefits

• Stepped shape plastic housing • Full range input
• Compact size
• Isolation Class II
• Can be ssembled on an industrial DIN Rail TS-35/7.5 or 15
• DC output voltage adjustable
• No load power consumption <0.3 W

Product Application Information

• Industrial control systems • Building automation
• Factory automation
• Electro-mechanical apparatus
• Household control system

Why use a DIN Rail Power Supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC/DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids and relays.

Points to Consider When Buying a DIN Rail Power Supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection Types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Standards

UL60950-1, UL508, TUV EN61558-2-16, IEC60950-1 approved; Design refer to EN50178, TUV EN60950-1

Mean Well

Specificaties
Kenmerk Waarde
AC or DC Output Voltage Dc
Input Voltage 85 → 264 V ac, 120 → 370 V dc
Output Voltage 12 V dc
Output Current 7.1 A
Power Rating 85.2W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 90mm
Width 70mm
Minimum Temperature -30°C
Depth 54.5mm
Output Voltage Adjustment Range 12 → 13V
MTBF 856.5kh
Ripple And Noise 120mV Pk-Pk
Series HDR
Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
Maximum Temperature +70°C
Special Features Small & Compact
Mounting Type DIN Rail
Load Regulation ±1%
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
53 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,88
(excl. BTW)
38,57
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
31,88 €
5 - 9
30,92 €
10 +
29,96 €
Related Products
The TBLC series DIN Rail mounting power supplies ...
Description:
The TBLC series DIN Rail mounting power supplies are designed for industrial and residential applications. They are lower cost than the existing TBL range, with similar electrical specifications. Also, they fully comply to the new standby power and efficiency requirements ...
The miniature LOGO!Power power supply units in the ...
Description:
The miniature LOGO!Power power supply units in the same design as the LOGO!8 modules offer great performance in the smallest of spaces. The high degree of efficiency across the entire load range and the low power loss in no-load operation ...
7.5W to 100W Low Profile DIN Rail Mount ...
Description:
7.5W to 100W Low Profile DIN Rail Mount Power Supplies. Low Profile for Building Automation5V to 24V OutputsWide Range AC InputDouble Insulation-25 to +71°C OperationConvection CooledDIN Rail or Chassis Mount.
DC-DC Ultra slim Industrial DIN rail converter, Input ...
Description:
DC-DC Ultra slim Industrial DIN rail converter, Input 18-75Vdc, Single Output 12Vdc at 1.25A. width only 17.5mm (1SU)4:1 ultra wide input range-40∼+85 DEG C wide working temperatureNo minimum load required DC output adjustable (+/- 10%)cooling by free air convectioncan be ...