SolaHD 100VA DIN Rail & Panel Mount Transformer, 240V ac, 480V ac Primary, 24V ac Secondary

  • RS-stocknr. 891-3544
  • Fabrikantnummer E100D
  • Fabrikant SolaHD
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

SolaHD SBE Encapsulated Series Transformers

The SBE Encapsulated series control transformers have been epoxy encapsulated thus sealing the transformer windings from moisture, dirt and industrial contaminants. They feature extra deep, moulded terminal barriers which helps to reduce the possibility of electrical failure from arcing or frayed lead wires. Thanks to their rugged design and high reliability they are ideally suited for all industrial applications and environments.

50 to 1000 VA, 50/60 Hz suitable for worldwide applications
Interleaved copper windings reduce I²R losses and maximize efficiency
+55 °C Rise, +105 °C insulation system to minimize heat
Epoxy encapsulated to protect cores and coils against moisture, dirt, and other contaminants
Meets or Exceeds NEMA Standard ST 1 and ANSI C89.1 for load inrush capability
Integrally moulded, flame retardant (IEC 707 / ISO Class 1210) Terminal Blocks provide greater terminal contact area and improved conductivity
Heavy gauge steel mounting plate
Mounting dimensions are compatible with similar control transformers

Specificaties
Kenmerk Waarde
Primary Voltage Rating 240V ac, 480V ac
Secondary Voltage Rating 24V ac
Power Rating 100VA
Mounting Type Panel
Dimensions 86.1 x 117.1 x 75.2mm
Maximum Operating Frequency 60Hz
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30/03/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
60,27
(excl. BTW)
72,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
60,27 €
2 +
51,24 €
Related Products
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. This range of single-phase single-winding safety and isolation transformer is primarily designed for use in repetitive applications.ABT 7 series transformers provide enhanced electrical isolation ...
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. Single-phase single-winding safety and isolation transformers.Able to supply higher powers on occasion.Feature a panel display to reduce ESD. Screw termination.Plate mounting.
Single-phase control and signalling transformers (50 → 60 ...
Description:
Single-phase control and signalling transformers (50 → 60 Hz - class 1).Active parts protected by cover up to 1000 VA.Mounting on full or perforated platinum, or rail according to power.Direct mounting possible on symmetrical DIN rail up to 250 VA.More ...
The International series transformers have been designed to ...
Description:
The International series transformers have been designed to comply with the demands of electromagnetic control components which can demand inrush currents of up to 10 times the nominal rating without sacrificing secondary voltage stability beyond practical limits. They fully comply ...