MCP4661T-502E/ML, Digital Potentiometer 5kΩ 257-Position Log 2-Channel I2C 16-Pin QFN

  • RS-stocknr. 177-2861
  • Fabrikantnummer MCP4661T-502E/ML
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

The MCP466X devices are dual channel, non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an I2C compatible interface. The MCP466X family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer WiperLock™ Technology which allows the user unlimited reprogramming and locking of the wiper setting. It is useful for equipment that requires factory trimming or recalibration. The MCP466X devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count.

Dual Resistor Network
Potentiometer or Rheostat configuration options
Resistor Network Resolution
8-bit: 256 Resistors (257 Steps)
RAB Resistances options of:
5kΩ
10kΩ
50kΩ
100kΩ
Zero-Scale to Full-Scale Wiper operation
Low Wiper Resistance: 75Ω (typ.)
Low Tempco:
Absolute (Rheostat): 50 ppm typical(0°C to 70°C)
Ratiometric (Potentiometer): 15 ppm typical
I2C™Compatible Serial interface
100 kHz
400 kHz
3.4 MHz

Specificaties
Kenmerk Waarde
Control Interface I2C
Resistance Value 5kΩ
Number of Positions 257
Taper Type Log
Memory Type Non-Volatile
Number of Pots per Package 2
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Power Supply Type Single
Dimensions 4 x 4 x 0.95mm
Height 0.95mm
Automotive Standard AEC-Q100
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Length 4mm
Width 4mm
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (On a Reel of 3300)
0,66
(excl. BTW)
0,80
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3300 +
0,66 €
2.178,00 €
*prijsindicatie
Related Products
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range ...
Description:
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.Featured is WiperLock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), ...
Replaces Potentiometers In New Designs10K, 50K & 100K ...
Description:
Replaces Potentiometers In New Designs10K, 50K & 100K Ω End-to-End Terminal Resistances+2.7 to +5.5 V Single-Supply±3 V Dual Supply3-Wire SPI Compatible Serial Data Input and OutputSpecified for Operation: -40°C to 125°CApplicationsMechanical Potentiometer ReplacementStereo Channel Audio Level ...
2-channel, 256-position potentiometersEnd-to-end resistance: 2.5 kΩ, 10 kΩ, ...
Description:
2-channel, 256-position potentiometersEnd-to-end resistance: 2.5 kΩ, 10 kΩ, 50 kΩ, and 100 kΩCompact 10-lead MSOP (3 mm ´ 4.9 mm) packageFast settling time: tS = 5 μs typical on power-upFull read/write of wiper registerPower-on preset to midscaleComputer software replaces microcontroller ...
AD5262 – 2-Channel (Independently Programmable)Potentiometer Replacement 20 kΩ, ...
Description:
AD5262 – 2-Channel (Independently Programmable)Potentiometer Replacement 20 kΩ, 50 kΩ, 200 kΩ5 V to 15 V Single-Supply, ±5.5 V Dual-Supply Operation256 PositionsAD5260 – 1-ChannelLow Temperature Coefficient 35 ppm/°C4-Wire SPI-Compatible Serial Data InputPower ON Mid-Scale PresetApplicationsMechanical ...