RS PRO LCD, LED Battery Meter 12V dc ±0.5 %

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

LED’s Scan from “F” to “E” on power-up.(LED test mode)
The meter will automatically display the current battery power when connected to the battery.
When the battery voltage falls below the currently displayed LED bar for >155s, the highest LED segment switches off. The LED bar display function is that as the voltage level drops the LED segments switch off one by one, 155 seconds after the voltage falls below the threshold for the currently illuminated highest LED segment.
While charging, when the battery voltage increases above the voltage threshold of current LED bar for >200s the next LED segment illuminates. The charging status is shown from the first bar to the current bar. The LED bar display function is that as the voltage level increases the LED segments illuminate one by one, 200 seconds after the voltage increases above the threshold for the currently illuminated highest LED segment.
When disconnected then reconnected to battery, the meter will retest the current battery power and display the related voltage LED bar.

Specificaties
Kenmerk Waarde
Battery Voltage 12 → 48V dc
Cutout Width 53mm
Display Type LCD, LED
Meter Accuracy ±0.5 %
Depth 65mm
Meter Type Digital
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
73 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
60,87
(excl. BTW)
73,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
60,87 €
Related Products
The CUB5RT provides the user with the ultimate ...
Description:
The CUB5RT provides the user with the ultimate flexibility, from its complete user programming to the optional setpoint control and communications capability. It accepts an RTD input and provides a temperature display in ̊F or ̊C. The meter also features ...
LCD compact digital/virtual analogue indicators with common dimensions ...
Description:
LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an ...
All have an operating temperature range of 0 ...
Description:
All have an operating temperature range of 0 to 50°C unless specified otherwise. One piece snap-in designLow power consumptionAuto-zero, auto-polarityProgrammable decimal pointsLED backlightFunctions as ammeter when used with a 200mV digital current shunt3 to 7.5Vdc power supply to measure an ...
The SP 400-EB-W features an enhanced black LCD ...
Description:
The SP 400-EB-W features an enhanced black LCD and 200mV d.c. measurement range with auto-zero and auto-polarity. Decimal points are user selectable. The SP 400-EB-W features a negative rail generator which enables the meter to measure a signal referenced to ...