Aim-TTi 1908P Bench LCD Digital Multimeter True RMS, AC Current, AC Voltage, Capacitance, DC Current, DC Voltage,

  • RS-stocknr. 123-8854
  • Fabrikantnummer 58122-1040
  • Fabrikant Aim-TTi
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Aim-TTI 1908P Series Dual Measurement Bench Multimeter

Aim-TTi 1908 Series is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. The logger function can store up to 500 readings from the main display in non-volatile memory. The two displays can be used to display a measurement along with the selected range (e.g. 100 Vdc), a measurement in two different units (e.g. AC volts and dBm), the result of a calculated function (e.g. value and % deviation), two parameters of one signal (e.g. AC and DC volts) or two different signals (e.g. AC volts and DC current). Software 1908-PC Link provides remote control of main functions and logging function with graphical and tabular displays (logged data can be exported to a CSV file). Model 1908P can be remotely controlled via its RS232, USB, GPIB or LAN interface. Model 1908 (non ’P’) can only be controlled via USB.

Features and Benefits

Affordable 5.5 digit high performance bench/portable multimeter, 120 000 counts Dual display (main display and secondary display) and dual measurement capability
Mains power or Internal rechargeable batteries for true portability
High accuracy and resolution 0.02%, 1 μV, 0.1 μA, 1 mΩ
Manual or Auto-ranging
True RMS AC and AC+DC measurement
DC and AC volts, DC and AC current, resistance, capacitance, frequency, and temperature measurement
Measurement post-processing
Continuity and diode checks
Two or four wire selectable ohms measurement
Display nulling and ohms null
Selectable measurement speed
Touch hold mode - holds onto a stable reading until updated
500 point data logger with timer
Temperature measurement for PT100 or PT1000 sensors
Wide range of computing functions e.g. Ax + B
External input/output remote triggering
Closed case calibration
USB interface standard (1908 & 1908P) plus RS232, LAN/LXI and GPIB interfaces (1908P only)
Kensington security slot incorporated
Dimensions 250 x 97 x 295 mm
Weight 3.2 kg

Note

In dual measurement mode a completely independent but complementary measurement can be made and displayed on the secondary display. The two independent measurements are made alternately, not simultaneously, and the display update rate for each measurement is consequently reduced (this is not the same as dual display mode, where both a measurement and a modified version of that measurement are displayed e.g. ac Volts and the dB equivalent).

Standards

EN61010-1, EN61010-2-030 & EN61010-2-033, EN61326-1 EMC

Supplied with

IVI driver, LV/CVI driver, USB driver

Specificaties
Kenmerk Waarde
Multimeter Type Bench
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Resistance Measurement 1kΩ
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum Temperature Measurement +400°C
Absolute Maximum Capacitance Measurement 100µF
Functions Measured AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature
True RMS Yes
Maximum Frequency 100kHz
Display Type LCD
Model Number p 1908P
AC Current Measurement Resolution 100nA ac
DC Current Measurement Resolution 100nA dc
Resistance Measurement Resolution 1mΩ
DC Voltage Measurement Resolution 1µV dc
AC Voltage Measurement Resolution 1µV ac
Capacitance Measurement Resolution 10pF
Temperature Measurement Resolution 0.1°C
Height 88mm
Battery Type Rechargeable NiMH
Safety Category Voltage 600V
Dimensions 260 x 235 x 88mm
Best DC Voltage Accuracy 0.02 %
Maximum Operating Temperature +40°C
Best Temperature Measurement Accuracy 0.05 %
Best Capacitance Measurement Accuracy 2 %
Best AC Voltage Accuracy 0.3 %
Width 235mm
Best AC Current Accuracy 0.35 %
Best Resistance Measurement Accuracy 0.05 %
Minimum Operating Temperature +5°C
Best DC Current Accuracy 0.05 %
Safety Category Level CAT II
Weight 2kg
Battery Life >20 (Enabled Backlight) h, >35 (Disabled Backlight) h
Length 260mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
595,00
(excl. BTW)
719,95
(incl. BTW)
Aantal stuks
Per stuk
1 +
595,00 €
Kalibratie-opties
Related Products
The Amprobe 33XR-A is a manual ranging digital ...
Description:
The Amprobe 33XR-A is a manual ranging digital multimeter with temperature and capacitance measurement. With a Magne-Grip holster and magnetic hanging strap to keep the meter convenient, the 33XR-A is designed for field service technicians. The meter includes a Cat ...
RS PRO IDM-8300 Series bench digital multimeters (DMM) ...
Description:
RS PRO IDM-8300 Series bench digital multimeters (DMM) include 50 000 counts, VF (vacuum fluorescent) dual-display, 0-02% basic DC voltage accuracy and a USB protocol connector. These features provide users with measurement precision, comprehensive data observation and the convenience of ...
RS PRO IDM-8300 Series bench digital multimeters (DMM) ...
Description:
RS PRO IDM-8300 Series bench digital multimeters (DMM) include 50 000 counts, VF (vacuum fluorescent) dual-display, 0-02% basic DC voltage accuracy and a USB protocol connector. These features provide users with measurement precision, comprehensive data observation and the convenience of ...
Keysight U1251B Series handheld digital multimeters are designed ...
Description:
Keysight U1251B Series handheld digital multimeters are designed for users to perform tests confidently and efficiently over longer periods of time due to the precision, accuracy and repeatability. The U1251B digital multimeter is also designed to increase production with the ...