Hammond Freescale FRDM-KL25Z Case, Black

  • RS-stocknr. 795-6095
  • Fabrikantnummer 1593HAMFREE2BK
  • Fabrikant Hammond
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CA
Productomschrijving

Kinetis Freedom Board Enclosures

ABS enclosures designed to house the Kinetis Freedom KL05Z and KL25Z development boards.

Moulded in general purpose ABS plastic
Machined to allow access to I/O connectors and frequently used controls and/or LEDS
Available in black, grey or translucent blue with a satin texture finish
Secured with self-tapping screws (black and translucent blue enclosures have black screws, grey enclosures have nickel finish screws)

Supplied with

Four self-adhesive rubber feet, instruction sheet

The Kinetis range of ARM Cortex core microcontrollers consists of multiple hardware- and software-compatible Cortex-M0+ and Cortex-M4 MCU families with exceptional low-power performance, memory scalability and feature integration. Families range from the entry-level Cortex-M0+ Kinetis L Series to the high-performance, feature-rich Cortex-M4 Kinetis K and include a wide selection of analogue, communication, HMI, connectivity and security features.

Specificaties
Kenmerk Waarde
For Use With Freescale FRDM-KL25Z
Colour Black
External Dimensions 92 x 66 x 28mm
Body Material ABS
Cut-Out Type Reset, USB Mini B
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,97
(excl. BTW)
10,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
8,97 €
15 - 24
8,52 €
25 +
8,25 €
Related Products
Round 110mm diameter ABS enclosure suitable for hand ...
Description:
Round 110mm diameter ABS enclosure suitable for hand held, table top and wall mounting Colour; off-white (RAL9002)Available with domed top or flat recessed top for fitting a Ø72 membrane keypad or product labelA battery compartment lid or extension base is ...
The Takachi AWN series is a heavy duty ...
Description:
The Takachi AWN series is a heavy duty waterproof enclosure ideally suited to tough outdoor environments. These enclosures have diecast side plates and an extruded aluminium body with fins on either side which act as a heat sink. Application examples ...
Plug case moulded in high impact, flame resistant ...
Description:
Plug case moulded in high impact, flame resistant (UL94V-0; UL94V-2) polystyrenePlug assembly with brass earth pin and sleeved live and neutral pins (live pin with fuse holder)Base with 6 mounting bosses for PCBs etc.
2-part aluminium enclosure ideal for use with large ...
Description:
2-part aluminium enclosure ideal for use with large transformers etc.Designed with lifting recesses and internal sub-chassis for heavy mains supply isolation transformers or other electric/electronic assembliesIntegral pre-drilled stand-off plateVentilation louvres.