- RS-stocknr.:
- 172-3027
- Fabrikantnummer:
- 8.07.10 J-Trace Isolator
- Fabrikant:
- SEGGER
6 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 372,80
(excl. BTW)
€ 451,09
(incl. BTW)
Aantal stuks | Per stuk |
1 - 2 | € 372,80 |
3 - 4 | € 344,84 |
5 - 9 | € 340,36 |
10 - 24 | € 335,89 |
25 + | € 331,79 |
- RS-stocknr.:
- 172-3027
- Fabrikantnummer:
- 8.07.10 J-Trace Isolator
- Fabrikant:
- SEGGER
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
SEGGER Microcontroller J-Trace
The SEGGER Microcontroller KG J-Trace is an isolator. It can be connected between a J-Trace Pro V2 or any ARM-board that uses the standard 19-pin Cortex-M connector to provide electrical isolation while keeping high-speed peed trace capabilities. This is essential when the development tools are not connected to the same ground. It is useful to protect the development tools from electrical spikes that often occur in some applications.
Features and Benefits:
1 kV DC isolation
3 LEDs to indicate emulator power, target power and target RESET
ETM trace pins fully supported up to 75MHz trace clock
JTAG frequency: up to 50MHz
JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
Powered from an emulator, a few microamps (<25μA) drawn from a target
SWD frequency: up to 4MHz
3 LEDs to indicate emulator power, target power and target RESET
ETM trace pins fully supported up to 75MHz trace clock
JTAG frequency: up to 50MHz
JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
Powered from an emulator, a few microamps (<25μA) drawn from a target
SWD frequency: up to 4MHz
Specificaties
Kenmerk | Waarde |
---|---|
Kit Name | J-Trace Isolator |
For Use With | 19 Pin Cortex-M, ARM-Board |
Product Type | Programmer |