Electromen OY, DC Motor Controller, Potentiometer Control, 12 → 24 V dc, 3 A, Panel Mount

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FI
Productomschrijving

EM-185 DC Motor Speed Regulator

The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, and there is also a load compensation (RxI) adjustment. Thanks to these features drive offers good performance in motor speed control applications. The current limit and the rpm range are adjustable with trimmer potentiometers. The power stage of the device is protected against short-circuit and overload (over temp.).The drive is easy to mount in a 10mm hole in an assembly panel.

Features & Benefits

1 Quadrant
Panel mountable
Small size
Motor power 5-80W
Load compensation Rxl
Adjustable current limit
EMC tested (CE marked)
Overload and short circuit protected

Specificaties
Kenmerk Waarde
Supply Voltage 12 → 24 V dc
Current Rating 3 A
Voltage Rating 35 V
Control Input Potentiometer
Mounting Style Panel Mount
Length 37mm
Width 30mm
Operating Temperature Range 0 → +60 °C
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
91 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
106,20
(excl. BTW)
128,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
106,20 €
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
Small sizeHigh current outputCurrent limitZero current limitOvervoltage brakeSpeed ...
Description:
Small sizeHigh current outputCurrent limitZero current limitOvervoltage brakeSpeed settingFlexible control inputsImpulse / continuous modeRail base mountableDigital parameter setting48V version of EM-241CCurrent limit setting input ( new )Freewheel options ( new )2 or 16kHz PWM freq. ( new )Prog ver C-v1.5Eight ...
High current outputBrake load outputCurrent limitCurrent limit for ...
Description:
High current outputBrake load outputCurrent limitCurrent limit for brake alsoZero-current limitSpeed setting/adjustmentFlexible control inputsImpulse / continuous modeRail base mountableDigital parameter settingC versions program2/16kHz pwm freq. optionsFreewheel optionsAutoreverse optionRunning indication ...
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne ...
Description:
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne or two pulse feedbackVoltage or mA controlPosition accuracy max. 0.2%Versatile setting optionsDigitally settable parametersHousing options available.