RS PRO, DC Motor Controller, Potentiometer Control, 19 34 V dc, 15 A, Skeleton/Boxed

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Series 2600 Reversible Motor Controller

Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors.

Operates from a battery or rectified smooth dc. supply
12 or 24V dc. supply voltage
15 or 30A current rated version
Forward and reverse direction control
Protected against short circuit to output and polarity misconnection

Adjustable up to 15 or 30A continuous rating, 27 or 56A peak
Settable presets for high or low speed, overcurrent, acceleration or deceleration
Fault indication via flashing LED for overcurrent, current tripped, low supply voltage, over temperature
Over current and thermal protection, progressive thermal shutdown

Specificaties
Kenmerk Waarde
Supply Voltage 19 34 V dc
Current Rating 15 A
Voltage Rating 24 V
Compatible Motor Type Permanent Magnet, Shunt
Control Input Potentiometer
Mounting Style Skeleton/Boxed
Length 148mm
Width 132mm
Depth 24mm
Dimensions 148 x 132 x 24 mm
Operating Temperature Range -50 +65 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13/07/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
204,33
(excl. BTW)
247,24
(incl. BTW)
Aantal stuks
Per stuk
1 +
204,33 €
Related Products
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne ...
Description:
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne or two pulse feedbackVoltage or mA controlPosition accuracy max. 0.2%Versatile setting optionsDigitally settable parametersHousing options available.
Linear servo control amplifier used to control motors ...
Description:
Linear servo control amplifier used to control motors up to 50WSuitable for a wide range of motors including the Maxon RE36 and A-Max 324 quadrant operation5 operating modes , (IxR, voltage regulation, digital encoder, dc tacho, current control)External DIP switch ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...
The digital EC sensorless amplifier is a 1-quadrant ...
Description:
The digital EC sensorless amplifier is a 1-quadrant digital controller for the control of brushless dc EC motors up to 250W. Rotor position/Hall sensors are not required- the actual rotor position is evaluated by using the Back-EMF sensing technique. Functions ...