Recom RS DC-DC Converter, 12V dc/ 166mA Output, 9 → 18 V dc Input, 2W, Through Hole, +85°C Max Temp -40°C Min
- RS-stocknr.:
- 473-5198P
- Fabrikantnummer:
- RS-1212S
- Fabrikant:
- Recom
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/09/2024, met een levertijd van 2 à 3 werkdagen.
Prijs Per stuk (geleverd in een tube)
€ 16,68
(excl. BTW)
€ 20,18
(incl. BTW)
Aantal stuks | Per stuk |
5 - 9 | € 16,68 |
10 - 24 | € 16,17 |
25 - 49 | € 15,65 |
50 + | € 15,13 |
- RS-stocknr.:
- 473-5198P
- Fabrikantnummer:
- RS-1212S
- Fabrikant:
- Recom
- Land van herkomst:
- TW
Recom 2W SIP Single/Dual Output Regulated Isolated DC-DC Converter - RS Series
High power-density, an industrial temperature range of -40° to +85°C.
Additional features such as Remote-On-Off control make these converters ideal for highly sophisticated industrial designs.
Additional features such as Remote-On-Off control make these converters ideal for highly sophisticated industrial designs.
2:1 wide input range
Regulated outputs
1kVdc isolation
Continuous short circuit protection
Low noise
UL94V-0 package material
83% efficiency
SIP 8 package
Regulated outputs
1kVdc isolation
Continuous short circuit protection
Low noise
UL94V-0 package material
83% efficiency
SIP 8 package
Note
Operating temperature is without derating.
Standards
EN60950-1
RECOM DC-DC Converter, 2:1 Input, 1000μF Maximum Capacitive Load - RS Series - RS-1212S
Safely distribute energy to voltage-sensitive components on your PCB with this DC-DC converter from RECOM. It converts supply voltages ranging from 9 to 18V DC to a stable 12V DC output that your PCB-connected devices can safely use. The converter has solder pins for through-hole mounting to your circuit boards, which creates a permanent and secure connection. Thanks to its non-conductive housing, this unit is insulated and helps to protect you against the risk of electric shocks.
Features & Benefits
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions
• Compact dimensions of 21.8 (length) x 9.2 (width) x 11.1mm (depth) for use in setups with limited space
• Low power rating of 2W for energy efficiency
• MTBF of up to 1,398,000 at +25°C for long-term performance
• Continuous short-circuit protection for electrical safety
• Compact dimensions of 21.8 (length) x 9.2 (width) x 11.1mm (depth) for use in setups with limited space
• Low power rating of 2W for energy efficiency
• MTBF of up to 1,398,000 at +25°C for long-term performance
• Continuous short-circuit protection for electrical safety
Applications
• Consumer electronics
• Laptop chargers
• Medical equipment
• Laptop chargers
• Medical equipment
Is this DC-DC converter fireproof?
No, this DC-DC converter isn't fireproof but it is flame-retardant. This means it will help to stop the spread of flames when a fire occurs, reducing the potential for damage.
Kenmerk | Waarde |
---|---|
Output Voltage | 12V dc |
Input Voltage Range | 9 → 18 V dc |
Power Rating | 2W |
Input Voltage Nominal | 12 V dc |
Output Current | 166mA |
Mounting Type | Through Hole |
Isolated | Yes |
Number of Outputs | 1 |
Package | SIP |
Isolation Voltage | 500V ac |
Width | 9.2mm |
Depth | 11.1mm |
Length | 21.8mm |
Series | RS |
Load Regulation | ±0.5% |
Maximum Temperature | +85°C |
Standards Met | cRUus, IEC/EN 60601-1, IEC/EN 60950-1, UL 60950-1 |
Minimum Temperature | -40°C |
Efficiency | 80% |
- RS-stocknr.:
- 473-5198P
- Fabrikantnummer:
- RS-1212S
- Fabrikant:
- Recom
- Land van herkomst:
- TW
Recom 2W SIP Single/Dual Output Regulated Isolated DC-DC Converter - RS Series
High power-density, an industrial temperature range of -40° to +85°C.
Additional features such as Remote-On-Off control make these converters ideal for highly sophisticated industrial designs.
Additional features such as Remote-On-Off control make these converters ideal for highly sophisticated industrial designs.
2:1 wide input range
Regulated outputs
1kVdc isolation
Continuous short circuit protection
Low noise
UL94V-0 package material
83% efficiency
SIP 8 package
Regulated outputs
1kVdc isolation
Continuous short circuit protection
Low noise
UL94V-0 package material
83% efficiency
SIP 8 package
Note
Operating temperature is without derating.
Standards
EN60950-1
RECOM DC-DC Converter, 2:1 Input, 1000μF Maximum Capacitive Load - RS Series - RS-1212S
Safely distribute energy to voltage-sensitive components on your PCB with this DC-DC converter from RECOM. It converts supply voltages ranging from 9 to 18V DC to a stable 12V DC output that your PCB-connected devices can safely use. The converter has solder pins for through-hole mounting to your circuit boards, which creates a permanent and secure connection. Thanks to its non-conductive housing, this unit is insulated and helps to protect you against the risk of electric shocks.
Features & Benefits
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions
• Compact dimensions of 21.8 (length) x 9.2 (width) x 11.1mm (depth) for use in setups with limited space
• Low power rating of 2W for energy efficiency
• MTBF of up to 1,398,000 at +25°C for long-term performance
• Continuous short-circuit protection for electrical safety
• Compact dimensions of 21.8 (length) x 9.2 (width) x 11.1mm (depth) for use in setups with limited space
• Low power rating of 2W for energy efficiency
• MTBF of up to 1,398,000 at +25°C for long-term performance
• Continuous short-circuit protection for electrical safety
Applications
• Consumer electronics
• Laptop chargers
• Medical equipment
• Laptop chargers
• Medical equipment
Is this DC-DC converter fireproof?
No, this DC-DC converter isn't fireproof but it is flame-retardant. This means it will help to stop the spread of flames when a fire occurs, reducing the potential for damage.
Kenmerk | Waarde |
---|---|
Output Voltage | 12V dc |
Input Voltage Range | 9 → 18 V dc |
Power Rating | 2W |
Input Voltage Nominal | 12 V dc |
Output Current | 166mA |
Mounting Type | Through Hole |
Isolated | Yes |
Number of Outputs | 1 |
Package | SIP |
Isolation Voltage | 500V ac |
Width | 9.2mm |
Depth | 11.1mm |
Length | 21.8mm |
Series | RS |
Load Regulation | ±0.5% |
Maximum Temperature | +85°C |
Standards Met | cRUus, IEC/EN 60601-1, IEC/EN 60950-1, UL 60950-1 |
Minimum Temperature | -40°C |
Efficiency | 80% |